LIVE-CONFIG(7)

NAME
live-config - System Configuration Components

DESCRIPTION
live-config contains the components that configure a live system during the boot process (late userspace).

CONFIGURATION
live-config can be configured through boot parameters or configuration files. If both mechanisms are used for a certain option, the boot parameters take precedence over the configuration files. When using persistency, live-config components are only run once.

If live-build(7) is used to build the live system, the live-config parameters used by default can be set through the --bootappend-live option, see lb_config(1) manual page.

  Boot Parameters (components)
live-config is only activated if 'boot=live' is used as a boot parameter. Additionally, live-config needs to be told which components to run through the 'live-config.components' parameter or which components to not run through the 'live-config.nocomponents' parameter. If both 'live-config.components' and 'live-config.nocomponents' are used, or, if either one is specified multiple times, always the later one takes precedence over the previous one(s).

live-config.components | components
    All components are run. This is what live images use by default.

live-config.components=COMPONENT1,COMPONENT2, ... COMPONENTn | components=COMPONENT1,COMPONENT2, ... COMPONENTn
    Only the specified components are run. Note that the order matters, e.g. 'live-config.components=sudo,user-setup' would not work since the user needs to be added before it can be configured for sudo. Look at the filenames of the components in /lib/live/config for their ordering number.

live-config.nocomponents | nocomponents
    No component is run. This is the same as not using any of 'live-config.components' or 'live-config.nocomponents'.

live-config.nocomponents=COMPONENT1,COMPONENT2, ... COMPONENTn | nocomponents=COMPONENT1,COMPONENT2, ... COMPONENTn
    All components are run, except the specified ones.

  Boot Parameters (options)
Some individual components can change their behaviour upon a boot parameter.

live-config.debconf-preseed=filesystem|medium|URL1|URL2| ... |URLn | debconf-preseed=medium|filesystem|URL1|URL2| ... |URLn
    Allows to fetch and apply one or more debconf preseed files to be applied to the debconf database. Note that the URLs must be fetchable by wget (http, ftp or file://).
    If the file is placed on the live medium, it can be fetched with file:///lib/live/mount/medium/FILE, or with file:///FILE if it is in the root filesystem of the live system itself.
    All preseed files in /lib/live/config-preseed/ in the root filesystem of the live system can be automatically enabled with the keyword 'filesystem'.
    All preseed files in /live/config-preseed/ of the live medium can be automatically enabled with the keyword 'medium'.
    If several mechanisms are combined, then filesystem preseed files are applied first, then medium preseed files, and last the network preseed files.

live-config.hostname=HOSTNAME | hostname=HOSTNAME
    Allows to set the hostname of the system. The default is 'debian'.

live-config.username=USERNAME | username=USERNAME
    Allows to set the username that gets created for autologin. The default is 'user'.

live-config.user-default-groups=GROUP1,GROUP2 ... GROUPn | user-default-groups=GROUP1,GROUP2 ... GROUPn
    Allows to set the default groups of the users that gets created for autologin is member of. The default is 'audio cdrom dip floppy video plugdev netdev powerdev scanner bluetooth'.

live-config.user-fullname="USER FULLNAME" | user-fullname="USER FULLNAME"
    Allows to set the fullname of the users that gets created for autologin. On Debian the default is 'Debian Live user'.

live-config.locales=LOCALE1,LOCALE2 ... LOCALEn | locales=LOCALE1,LOCALE2 ... LOCALEn
    Allows to set the locale of the system, e.g. 'de_CH.UTF-8'. The default is 'en_US.UTF-8'. In case the selected locale is not already available on the system, it is automatically generated on the fly.

live-config.timezone=TIMEZONE | timezone=TIMEZONE
    Allows to set the timezone of the system, e.g. 'Europe/Zurich'. The default is 'UTC'.

live-config.keyboard-model=KEYBOARD_MODEL | keyboard-model=KEYBOARD_MODEL
    Allows to change the keyboard model. There is no default value set.

live-config.keyboard-layouts=KEYBOARD_LAYOUT1,KEYBOARD_LAYOUT2 ... KEYBOARD_LAYOUTn | keyboard-layouts=KEYBOARD_LAYOUT1,KEYBOARD_LAYOUT2 ... KEYBOARD_LAYOUTn
    Allows to change the keyboard layouts. If more than one is specified, the tools of the desktop environment will allow to switch it under X11. There is no default value set.

live-config.keyboard-variants=KEYBOARD_VARIANT1,KEYBOARD_VARIANT2 ... KEYBOARD_VARIANTn | keyboard-variants=KEYBOARD_VARIANT1,KEYBOARD_VARIANT2 ... KEYBOARD_VARIANTn
    Allows to change the keyboard variants. If more than one is specified, the same number of values as keyboard-layouts values should be specified as they will be matched one-to-one in the order specified. Blank values are allowed. The tools of the desktop environment will allow to switch between each layout and variant pair under X11. There is no default value set.

live-config.keyboard-options=KEYBOARD_OPTIONS | keyboard-options=KEYBOARD_OPTIONS
    Allows to change the keyboard options. There is no default value set.

live-config.sysv-rc=SERVICE1,SERVICE2 ... SERVICEn | sysv-rc=SERVICE1,SERVICE2 ... SERVICEn
    Allows to disable sysv services through update-rc.d.

live-config.utc=yes|no | utc=yes|no
    Allows to change if the system is assuming that the hardware clock is set to UTC or not. The default is 'yes'.

live-config.x-session-manager=X_SESSION_MANAGER | x-session-manager=X_SESSION_MANAGER
    Allows to set the x-session-manager through update-alternatives.

live-config.xorg-driver=XORG_DRIVER | xorg-driver=XORG_DRIVER
    Allows to set xorg driver instead of autodetecting it. If a PCI ID is specified in /usr/share/live/config/xserver-xorg/DRIVER.ids within the live system, DRIVER is enforced for these devices. If both a boot parameter and a override is found, the boot parameter takes precedence.

live-config.xorg-resolution=XORG_RESOLUTION | xorg-resolution=XORG_RESOLUTION
    Allows to set xorg resolution instead of autodetecting it, e.g. 1024x768.

live-config.hooks=filesystem|medium|URL1|URL2| ... |URLn | hooks=medium|filesystem|URL1|URL2| ... |URLn
    Allows to fetch and execute one or more arbitrary files. Note that the URLs must be fetchable by wget (http, ftp or file://), the files are executed in /tmp of the running live system, and that the files needs their dependencies, if any, already installed, e.g. if a python script should be executed the system needs python installed. Some hooks for some common use-cases are available at /usr/share/doc/live-config/examples/hooks/ and <http://live-systems.org/other/hooks>.
    If the file is placed on the live medium, it can be fetched with file:///lib/live/mount/medium/FILE, or with file:///FILE if it is in the root filesystem of the live system itself.
    All hooks in /lib/live/config-hooks/ in the root filesystem of the live system can be automatically enabled with the keyword 'filesystem'.
    All hooks in /live/config-hooks/ of the live medium can be automatically enabled with the keyword 'medium'.
    If several mechanisms are combined, then filesystem hooks are executed first, then medium hooks, and last the network hooks.

  Boot Parameters (shortcuts)
For some common use cases where it would require to combine several individual parameters, live-config provides shortcuts. This allows both to have full granularity over all the options, as well keep things simple.

live-config.noroot | noroot
    Disables sudo and policykit, the user cannot gain root privileges on the system.

live-config.noautologin | noautologin
    Disables both the automatic console login and the graphical autologin.

live-config.nottyautologin | nottyautologin
    Disables the automatic login on the console, not affecting the graphical autologin.

live-config.nox11autologin | nox11autologin
    Disables the automatic login with any display manager, not affecting tty autologin.

  Boot Parameters (special options)
For special use cases there are some special boot paramters.

live-config.debug | debug
    Enables debug output in live-config.

  Configuration Files
live-config can be configured (but not activated) through configuration files. Everything but the shortcuts that can be configured with a boot parameter can be alternatively also be configured through one or more files. If configuration files are used, the 'boot=live' parameter is still required to activate live-config.

Note: If configuration files are used, either (preferably) all boot parameters should be put into the LIVE_CONFIG_CMDLINE variable, or individual variables can be set. If individual variables are used, the user is required to ensure that all the necessary variables are set to create a valid configuration.

Configuration files can be placed either in the root filesystem itself (/etc/live/config.conf, /etc/live/config/*), or on the live media (live/config.conf, live/config/*). If both places are used for a certain option, the ones from the live media take precedence over the ones from the root filesystem.

Although the configuration files placed in the configuration directories do not require a particular name or suffix, it is suggested for consistency reasons to either use 'vendor.conf' or 'project.conf' as a naming scheme (whereas 'vendor' or 'project' is replaced with the actual name, resulting in a filename like 'progress-linux.conf').

The actual content of the configuration files consists of one or more of the following variables.

LIVE_CONFIG_CMDLINE=PARAMETER1 PARAMETER2 ... PARAMETERn
    This variable corresponds to the bootloader command line.

LIVE_CONFIG_COMPONENTS=COMPONENT1,COMPONENT2, ... COMPONENTn
    This variable corresponds to the 'live-config.components=COMPONENT1,COMPONENT2, ... COMPONENTn' parameter.

LIVE_CONFIG_NOCOMPONENTS=COMPONENT1,COMPONENT2, ... COMPONENTn
    This variable corresponds to the 'live-config.nocomponents=COMPONENT1,COMPONENT2, ... COMPONENTn' parameter.

LIVE_DEBCONF_PRESEED=filesystem|medium|URL1|URL2| ... |URLn
    This variable corresponds to the 'live-config.debconf-preseed=filesystem|medium|URL1|URL2| ... |URLn' parameter.

LIVE_HOSTNAME=HOSTNAME
    This variable corresponds to the 'live-config.hostname=HOSTNAME' parameter.

LIVE_USERNAME=USERNAME
    This variable corresponds to the 'live-config.username=USERNAME' parameter.

LIVE_USER_DEFAULT_GROUPS=GROUP1,GROUP2 ... GROUPn
    This variable corresponds to the 'live-config.user-default-groups="GROUP1,GROUP2 ... GROUPn"' parameter.

LIVE_USER_FULLNAME="USER FULLNAME"
    This variable corresponds to the 'live-config.user-fullname="USER FULLNAME"' parameter.

LIVE_LOCALES=LOCALE1,LOCALE2 ... LOCALEn
    This variable corresponds to the 'live-config.locales=LOCALE1,LOCALE2 ... LOCALEn' parameter.

LIVE_TIMEZONE=TIMEZONE
    This variable corresponds to the 'live-config.timezone=TIMEZONE' parameter.

LIVE_KEYBOARD_MODEL=KEYBOARD_MODEL
    This variable corresponds to the 'live-config.keyboard-model=KEYBOARD_MODEL' parameter.

LIVE_KEYBOARD_LAYOUTS=KEYBOARD_LAYOUT1,KEYBOARD_LAYOUT2 ... KEYBOARD_LAYOUTn
    This variable corresponds to the 'live-config.keyboard-layouts=KEYBOARD_LAYOUT1,KEYBOARD_LAYOUT2 ... KEYBOARD_LAYOUTn' parameter.

LIVE_KEYBOARD_VARIANTS=KEYBOARD_VARIANT1,KEYBOARD_VARIANT2 ... KEYBOARD_VARIANTn
    This variable corresponds to the 'live-config.keyboard-variants=KEYBOARD_VARIANT1,KEYBOARD_VARIANT2 ... KEYBOARD_VARIANTn' parameter.

LIVE_KEYBOARD_OPTIONS=KEYBOARD_OPTIONS
    This variable corresponds to the 'live-config.keyboard-options=KEYBOARD_OPTIONS' parameter.

LIVE_SYSV_RC=SERVICE1,SERVICE2 ... SERVICEn
    This variable corresponds to the 'live-config.sysv-rc=SERVICE1,SERVICE2 ... SERVICEn' parameter.

LIVE_UTC=yes|no
    This variable corresponds to the 'live-config.utc=yes|no' parameter.

LIVE_X_SESSION_MANAGER=X_SESSION_MANAGER
    This variable corresponds to the 'live-config.x-session-manager=X_SESSION_MANAGER' parameter.

LIVE_XORG_DRIVER=XORG_DRIVER
    This variable corresponds to the 'live-config.xorg-driver=XORG_DRIVER' parameter.

LIVE_XORG_RESOLUTION=XORG_RESOLUTION
    This variable corresponds to the 'live-config.xorg-resolution=XORG_RESOLUTION' parameter.

LIVE_HOOKS=filesystem|medium|URL1|URL2| ... |URLn
    This variable corresponds to the 'live-config.hooks=filesystem|medium|URL1|URL2| ... |URLn' parameter.

LIVE_CONFIG_DEBUG=
    This variable corresponds to the 'live-config.debug' parameter.

CUSTOMIZATION
live-config can be easily customized for downstream projects or local usage.

  Adding new config components
Downstream projects can put their components into /lib/live/config and do not need to do anything else, the components will be called automatically during boot.

The components are best put into an own debian package. A sample package containing an example component can be found in /usr/share/doc/live-config/examples.

  Removing existing config components
It is not really possible to remove components itself in a sane way yet without requiring either to ship a locally modified live-config package or using dpkg-divert. However, the same can be achieved by disabling the respective components through the live-config.nocomponents mechanism, see above. To avoid to always need specifing disabled components through the boot parameter, a configuration file should be used, see above.

The configuration files for the live system itself are best put into an own debian package. A sample package containing an example configuration can be found in /usr/share/doc/live-config/examples.

COMPONENTS
live-config currently features the following components in /lib/live/config.

debconf
    allows to apply arbitrary preseed files placed on the live media or an http/ftp server.

hostname
    configures /etc/hostname and /etc/hosts.

user-setup
    adds a live user account.

sudo
    grants sudo privileges to the live user.

locales
    configures locales.

locales-all
    configures locales-all.

tzdata
    configures /etc/timezone.

gdm3
    configures autologin in gdm3.

kdm configures autologin in kdm.

lightdm
    configures autologin in lightdm.

lxdm
    configures autologin in lxdm.

nodm
    configures autologin in nodm.

slim
    configures autologin in slim.

xinit
    configures autologin with xinit.

keyboard-configuration
    configures the keyboard.

sysvinit
    configures sysvinit.

sysv-rc
    configures sysv-rc by disabling listed services.

login
    disables lastlog.

apport
    disables apport.

gnome-panel-data
    disables lock button for the screen.

gnome-power-manager
    disables hibernation.

gnome-screensaver
    disables the screensaver locking the screen.

kaboom
    disables KDE migration wizard (squeeze and newer).

kde-services
    disables some unwanted KDE services (squeeze and newer).

debian-installer-launcher
    adds debian-installer-launcher on users desktop.

policykit
    grant user privilegies through policykit.

ssl-cert
    regenerating ssl snake-oil certificates.

update-notifier
    disables update-notifier.

anacron
    disables anacron.

util-linux
    disables util-linux' hwclock.

login
    disables lastlog.

xserver-xorg
    configures xserver-xorg.

ureadahead (ubuntu only)
    disables ureadahead.

openssh-server
    recreates openssh-server host keys.

xfce4-panel
    configures xfce4-panel to default settings.

xscreensaver
    disables the screensaver locking the screen.

hooks
    allows to run arbitrary commands from a file placed on the live media or an http/ftp server.

FILES

/etc/live/config.conf

/etc/live/config/*

live/config.conf

live/config/*

/lib/live/config.sh

/lib/live/config/

/var/lib/live/config/

/var/log/live/config.log

/live/config-hooks/*

live/config-hooks/*

/live/config-preseed/*

live/config-preseed/*

SEE ALSO
live-boot(7)

live-build(7)

live-tools(7)

HOMEPAGE
More information about live-config and the Live Systems project can be found on the homepage at <http://live-systems.org/> and in the manual at <http://live-systems.org/manual/>.

BUGS
Bugs can be reported by submitting a bugreport for the live-config package in the Bug Tracking System at <http://bugs.debian.org/> or by writing a mail to the Live Systems mailing list at <debian-live@lists.debian.org>.

AUTHOR
live-config was written by Daniel Baumann <mail@daniel-baumann.ch>.