sane-backends (1.0.23-3) unstable; urgency=low

  * QA upload
  * revert move to libtiff5-dev

 -- Rene Engelhard <rene@debian.org>  Sat, 06 Jul 2013 15:20:16 +0200

sane-backends (1.0.23-2) unstable; urgency=low

  * QA upload.
  * Add sane-desc.c_debian_mods.patch to series file. (Closes: #714993)

 -- Markus Koschany <apo@gambaru.de>  Fri, 05 Jul 2013 11:52:37 +0200

sane-backends (1.0.23-1) unstable; urgency=low

  * QA upload.
  * Upload to unstable.
  * This package has been orphaned. Set maintainer to the Debian QA Group.
  * Bump compat level to 9 (was 5) and require debhelper >= 9.
  * debian/control:
    - sane-utils: Inherit Section: graphics from source package sane-backends.
    - Remove versioned dependencies. They are trivially satisfied.
  * Drop the following patches. They are merged upstream now.
    - fix_v4l_build.patch
    - hurd_path_max_fix.patch
    - sane_desc_udev+acl.patch
    - scanimage_man_batch_start.patch
    - udev_usb_suspend.patch
    - xerox_mfp_add_scx_4623fw.patch
    - xerox_mfp_fix_usb_device.patch
  * Drop disable_rpath.patch because the RPATH is already removed by chrpath
    in debian/rules.
  * Rebase and refresh all other patches against the new upstream relase.
  * debian/rules:
    - Simplify debian/rules by using dh sequencer.
    - Build with --parallel and with autotools_dev.
    - Enable all hardening build flags.
    - Install umax_pp with sane-utils.install.
  * Build-Depend on libtiff5-dev. Thanks to Michael Terry for the patch.
    (Closes: #681079)
  * Build-Depend on libusb-1.0-0-dev and enable libusb1.0 support in
    debian/rules. Thanks to Martin Pitt for the report and Whoopie for the
    patch. (Closes: #687137)

 -- Markus Koschany <apo@gambaru.de>  Thu, 04 Jul 2013 17:41:47 +0200

sane-backends (1.0.23-0.1~experimental1) experimental; urgency=low

  * Non-maintainer upload.
  * New upstream version.

 -- John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>  Sat, 23 Feb 2013 20:12:58 +0100

sane-backends (1.0.22-7.4) unstable; urgency=low

  * Non-maintainer upload.
  * Compress all binaries with xz to free up some space on CD#1.

 -- Cyril Brulebois <kibi@debian.org>  Mon, 17 Sep 2012 16:44:07 +0200

sane-backends (1.0.22-7.3) unstable; urgency=low

  * Non-maintainer upload.
  * Fix build failure on kfreebsd (closes: #680234).

 -- Michael Gilbert <mgilbert@debian.org>  Sun, 15 Jul 2012 17:07:15 -0400

sane-backends (1.0.22-7.2) unstable; urgency=low

  * Non-maintainer upload.
  * Set sane-utils as 'Multi-Arch: foreign' (closes: #675797).

 -- Michael Gilbert <mgilbert@debian.org>  Thu, 28 Jun 2012 16:53:15 -0400

sane-backends (1.0.22-7.1) unstable; urgency=low

  * Non-maintainer upload.
  * Fix pending l10n issues. Debconf translations:
    - Catalan; (Innocent De Marchi).  Closes: #646505
    - Slovak (Slavko).  Closes: #639235
    - Polish (Michał Kułach).  Closes: #658351

 -- Christian Perrier <bubulle@debian.org>  Wed, 28 Mar 2012 07:39:00 +0200

sane-backends (1.0.22-7) unstable; urgency=low

  * debian/patches/sane-desc.c_debian_mods.patch:
    + Updated; do not output a timestamp as part of the udev rules file
      header, it is a source of conflict for multiarch.

 -- Julien BLACHE <jblache@debian.org>  Mon, 21 Nov 2011 15:39:26 +0100

sane-backends (1.0.22-6) unstable; urgency=low

  * debian/control:
    + Fix ibcam-dev -> libcam-dev typo.

 -- Julien BLACHE <jblache@debian.org>  Thu, 21 Jul 2011 17:54:48 +0200

sane-backends (1.0.22-5) unstable; urgency=low

  * debian/control:
    + Replace explicit architecture lists with appropriate architecture
      wildcards; patch from Robert Millan (closes: #634518).
    + Use kfreebsd-any architecture wildcard for libcam-dev in libsane-dev's
      Depends field, getting rid of the custom libcam-dev substvar.
    + Use linux-any architecture wildcard for udev | makedev, acl in libsane's
      Depends field, gettind rid of the custom udev substvar.
  * debian/rules:
    + Remove custom libcam-dev and udev substvars in dh_gencontrol call.

 -- Julien BLACHE <jblache@debian.org>  Wed, 20 Jul 2011 19:52:51 +0200

sane-backends (1.0.22-4) unstable; urgency=low

  * Multiarch conversion.

  * debian/control:
    + Bump debhelper build-dep to >= 8.1.3 for multiarch.
    + Add Pre-Depends: ${misc:Pre-Depends} to libsane.
    + Tag libsane with Multi-Arch: same.
    + New Multi-Arch: foreign libsane-common binary package.
    + Add libsane-common dependency to libsane.
  * debian/rules:
    + Use multiarch path.
    + libsane.install.in is now libsane-common.install.in.
    + libsane.docs is gone.
    + Create the multiarch pkgconfig directory and install the .pc file here.
    + Stop creating the gt68xx firmware directory in libsane.
    + Move HAL FDI file to libsane-common.
    + Disable SNMP support explicitly (needs Net-SNMP 5.6).
  * debian/libsane-dev.install:
    + Adapt for multiarch.
  * debian/libsane.install.in -> debian/libsane.install:
    + Adapt for multiarch, transfer multiarch-incompatible content to
      libsane-common.
  * debian/libsane-common.install.in:
    + Adopt multiarch-incompatible content previously found in libsane.
  * debian/libsane.links -> debian/libsane-common.links:
    + Transfer documentation symlinks to libsane-common.
  * debian/libsane-dev.dirs:
    + Removed; pkgconfig directory created in debian/rules.

  * debian/patches/multiarch_dll_search_path.patch:
    + Added; make /usr/lib/arch_triplet/sane the default location for SANE
      backends but keep /usr/lib/sane as a fallback for now.
  * debian/patches/multiarch_manpages_libdir.patch:
    + Added; use a generic /usr/lib/arch_triplet/sane path for backend
      location in the man pages (otherwise substituted from LIBDIR).

 -- Julien BLACHE <jblache@debian.org>  Mon, 13 Jun 2011 17:07:05 +0200

sane-backends (1.0.22-3) unstable; urgency=low

  * debian/control:
    + Bump Standards-Version to 3.9.2 (no changes).
  * debian/libsane.NEWS:
    + Added; document the switch to ACLs starting with 1.0.22-1.

  * debconf translations:
    + pt_BR.po: update from Eder L. Marques (closes: #619612).
    + nl.po: courtesy of Jeroen Schot (closes: #627043).

 -- Julien BLACHE <jblache@debian.org>  Thu, 02 Jun 2011 14:57:53 +0200

sane-backends (1.0.22-2) unstable; urgency=low

  * debian/patches/udev_usb_suspend.patch:
    + Added; switch to using power/control instead of power/level for
      device power setting, if available.
  * debian/patches/xerox_mfp_fix_usb_devices.patch:
    + Added; fix detection/handling of USB devices in xerox_mfp
      (closes: #617307).
  * debian/patches/xerox_mfp_add_scx_4623fw.patch:
    + Added; add IDs for the Samsung SCX-4623FW.
  * debian/patches/hurd_path_max_fix.patch:
    + Added; fix build on HURD where PATH_MAX is not defined
      (closes: #616299).
  * debian/patches/scanimage_man_batch_start.patch:
    + Added; fix improper documentation of --batch-start (closes: #614009).

 -- Julien BLACHE <jblache@debian.org>  Sat, 12 Mar 2011 11:32:32 +0100

sane-backends (1.0.22-1) unstable; urgency=low

  * New upstream release.
    + epson2: reject scan area settings that would lead to a division by zero
      (closes: #581181).

  * debian/control:
    + Bump Standards-Version to 3.9.1 (no changes).
    + Demote libsane-extras-* to Recommends again.
  * debian/rules:
    + Add acl (>= 2.2.49-4) to udev substvar for ACL utilities in /bin.
    + Use sane-desc -m udev+acl (closes: #591767, #612815).
  * debian/libsane.README.Debian:
    + Update; mention ConsoleKit and the udev rules now using ACLs.

  * debian/patches/sane-desc_udev+acl.patch:
    + Added; compared to experimental, setfacl is now in /bin.
  * debian/patches/fix_xerox_mfp_color_mode.patch,
    debian/patches/use_libsane_matched_for_scsi.patch,
    debian/patches/allow_dll.d_symlinks.patch,
    debian/patches/saned_exit_avahi_process.patch,
    debian/patches/xerox_mfp_new_ids.patch,
    debian/patches/scsi_perfection_2450.patch,
    debian/patches/scsi_scanjet_4c.patch,
    debian/patches/genesys_disable_raw_data_log.patch,
    debian/patches/fix_epson2_commands.patch,
    debian/patches/fix_epson2_cancel.patch:
    + Removed; merged upstream.

 -- Julien BLACHE <jblache@debian.org>  Wed, 16 Feb 2011 19:00:55 +0100

sane-backends (1.0.22~git1.0.21-157-g126c70d-1) experimental; urgency=low

  * Git snapshot.

  * debian/rules:
    + Add dependency on acl to libsane when depending on udev.
    + Use udev+acl mode when generating udev rules.

  + debian/patches/sane-desc_udev+acl.patch:
    + Added; try using ACLs for USB scanners in an effort to deconflict with
      MFP devices.

 -- Julien BLACHE <jblache@debian.org>  Wed, 21 Jul 2010 18:36:37 +0200

sane-backends (1.0.22~git1.0.21-87-g323ed01-1) experimental; urgency=low

  * Git snapshot.
    + genesys now has some support for LiDE 100 & 200 (closes: #586189).

 -- Julien BLACHE <jblache@debian.org>  Wed, 23 Jun 2010 18:37:59 +0200

sane-backends (1.0.21-9) unstable; urgency=low

  * debian/patches/fix_epson2_cancel.patch:
    + Added; fix handling of scanner errors by sending a cancel command
      (closes: #597922).

 -- Julien BLACHE <jblache@debian.org>  Sun, 12 Dec 2010 16:31:25 +0100

sane-backends (1.0.21-8) unstable; urgency=low

  * debian/patches/fix_epson2_commands.patch:
    + Added; fix list of supported commands for levels D1 and D2
      (closes: #582066).

 -- Julien BLACHE <jblache@debian.org>  Mon, 29 Nov 2010 18:12:16 +0100

sane-backends (1.0.21-7) unstable; urgency=low

  * debian/patches/genesys_disable_raw_data_log.patch:
    + Added; disable raw data logging. Raw data logging was enabled
      upstream at some point before 1.0.21 most probably as an oversight
      when committing new code. When enabled, a raw.pnm file is left
      behind in the cwd when using the genesys backend (closes: 602995).

  * debconf translations:
    + Properly install vi.po, mistakenly put in po/ instead of
      debian/po in 1.0.21-6.

 -- Julien BLACHE <jblache@debian.org>  Mon, 15 Nov 2010 19:00:34 +0100

sane-backends (1.0.21-6) unstable; urgency=low

  * debian/patches/saned_exit_avahi_process.patch:
    + Added; exit Avahi process on error/loop termination.
  * debian/patches/xerox_mfp_new_ids.patch:
    + Added; add USB IDs for supported machines in xerox_mfp (closes: #601748).
  * debian/patches/scsi_perfection_2450.patch:
    + Added; add SCSI IDs for the Perfection 2450 via FireWire
      (closes: #601810).
  * debian/patches/scsi_scanjet_4c.patch:
    + Added; add SCSI IDs for the ScanJet 4c (closes: #601656).

  * debconf translations:
    + vi.po: courtesy of Clytie Siddall (closes: #601530).

 -- Julien BLACHE <jblache@debian.org>  Sat, 06 Nov 2010 11:21:40 +0100

sane-backends (1.0.21-5) unstable; urgency=low

  * debconf translations:
    + cs.po: courtesy of Miroslav Kure (closes: #598338).
    + zh_CN.po: courtesy of YunQiang Su (closes: #599590, #599591).
    + da.po: courtesy of Joe Dalton (closes: #599642).
    + eu.po: courtesy of Iñaki Larrañaga Murgoitio (closes: #599810).
    + es.po: courtesy of Camaleón (closes: #600342).
    + fi.po: courtesy of Esko Arajärvi (closes: #600514).

 -- Julien BLACHE <jblache@debian.org>  Mon, 18 Oct 2010 10:08:12 +0200

sane-backends (1.0.21-4) unstable; urgency=low

  * debconf translations:
    + it.po: courtesy of Luca Monducci (closes: #593722).

 -- Julien BLACHE <jblache@debian.org>  Sun, 05 Sep 2010 09:44:28 +0200

sane-backends (1.0.21-3) unstable; urgency=low

  * debian/control:
    + Bump Standards-Version to 3.9.0 (no changes).

  * debian/patches/use_libsane_matched_for_scsi.patch:
    + Added; use libsane_matched for SCSI scanners rules too.
  * debian/patches/allow_dll.d_symlinks.patch:
    + Added; allow symlinks under /etc/sane.d/dll.d (closes: #588392).

 -- Julien BLACHE <jblache@debian.org>  Fri, 09 Jul 2010 18:21:58 +0200

sane-backends (1.0.21-2) unstable; urgency=low

  * debian/patches/fix_xerox_mfp_color_mode.patch:
    + Added; fix xerox_mfp color mode, from upstream (closes: #583789).

 -- Julien BLACHE <jblache@debian.org>  Tue, 01 Jun 2010 19:34:19 +0200

sane-backends (1.0.21-1) unstable; urgency=low

  * New upstream release (closes: #579254).
  * Moved to source format 3.0 (quilt).

  * debian/control:
    + Removed dpatch build-dep.
    + Add dependency on pkg-config to libsane-dev.
  * debian/rules:
    + Removed dpatch code.
    + --disable-fork-process -> --enable-pthread.
    + Install the pkg-config file for sane-backends.

  * All patches refreshed, tagged with DEP-3 headers.

 -- Julien BLACHE <jblache@debian.org>  Mon, 26 Apr 2010 19:59:08 +0200

sane-backends (1.0.20-14) unstable; urgency=low

  * debian/control:
    + Depend and build-depend on libjpeg-dev instead of libjpeg62-dev
      (closes: #569240).
    + Bump Standards-Version to 3.8.4 (no changes).

  * debian/sane-utils.saned.init:
    + Add $remote_fs to Required-Start & Required-Stop.

  * debconf translations:
    + fr.po: courtesy of Christian Perrier (closes: #564595).

 -- Julien BLACHE <jblache@debian.org>  Sat, 13 Feb 2010 10:03:12 +0100

sane-backends (1.0.20-13) unstable; urgency=low

  * debian/patches/34_genesys_gl841_cal_fix.dpatch:
    + Added; fix calibration on gl841-based scanners (closes: #563163).

  * debconf translations:
    + ja.po: courtesy of Hideki Yamane (closes: #564294).

 -- Julien BLACHE <jblache@debian.org>  Sun, 10 Jan 2010 15:21:22 +0100

sane-backends (1.0.20-12) unstable; urgency=low

  * debian/patches/33_epson2_update.dpatch:
    + Update epson2 from git HEAD (closes: #534746).

  * debconf translations:
    + de.po: courtesy of Helge Kreutzmann (closes: #562709).
    + sv.po: courtesy of Martin Bagge (closes: #562931).
    + ru.po: courtesy of Yuri Kozlov (closes: #563076).
    + pt.po: courtesy of Américo Monteiro (closes: #563174).

 -- Julien BLACHE <jblache@debian.org>  Fri, 01 Jan 2010 12:49:10 +0100

sane-backends (1.0.20-11) unstable; urgency=medium

  * Urgency set to medium to unbreak saned in testing.

  * debian/patches/12_saned_polling_fix.dpatch:
    + Added; unbreak saned's polling loop for more than 1 fds (closes: #562248).
  * debian/patches/13_saned_aliasing_fix.dpatch:
    + Added; fix strict aliasing issues in saned for gcc 4.4.

 -- Julien BLACHE <jblache@debian.org>  Thu, 24 Dec 2009 17:33:35 +0100

sane-backends (1.0.20-10) unstable; urgency=low

  * debian/libsane.README.Debian:
    + Updated udev-related information and instructions, added a note about
      only adding rules for scanners supported by libsane.
  * debian/sane-utils.saned.init:
    + Add missing --oknodo in s-s-d stop call in restart case
      (closes: #558648).
  * debian/sane-utils.templates:
    + Rework the standalone saned template and mention Avahi explicitly
      (closes: #556877).

  * debian/patches/22_dll_backend_conf.dpatch:
    + Updated; use better wording for the comment about the net backend
      in dll.conf (closes: #556912).
  * debian/patches/32_epson_perfection636.dpatch:
    + Added; add the Epson Perfection 636 SCSI scanner (closes: #555971).

 -- Julien BLACHE <jblache@debian.org>  Sat, 12 Dec 2009 11:33:09 +0100

sane-backends (1.0.20-9) unstable; urgency=low

  * debian/patches/11_udev_147.dpatch:
    + Added; remove NAME= from SCSI rules as udev 147 complains about it. Also
      remove support for kernel < 2.6.22. (closes: #555443).

 -- Julien BLACHE <jblache@debian.org>  Mon, 09 Nov 2009 21:01:32 +0100

sane-backends (1.0.20-8) unstable; urgency=low

  * debian/rules:
    + Fix nostrip builds, thanks to Tollef Fog Heen (closes: #548152).

  * debian/patches/31_genesys_raw_log_fix.dpatch:
    + Added; add missing check when logging raw data. Patch by
      Tollef Fog Heen <tfheen@err.no> (closes: #548154).

 -- Julien BLACHE <jblache@debian.org>  Sat, 26 Sep 2009 11:44:04 +0200

sane-backends (1.0.20-7) unstable; urgency=low

  * debian/control:
    + Demote avahi-daemon to a Suggests (closes: #543335).
    + libv4l-dev is not available on hurd-i386 either (closes: #545995).

  * debian/patches/30_xerox_samsung_ids.dpatch:
    + Added; add USB IDs for various Samsung-branded MFPs (closes: #545290).

 -- Julien BLACHE <jblache@debian.org>  Fri, 11 Sep 2009 19:16:15 +0200

sane-backends (1.0.20-6) unstable; urgency=low

  * debian/control:
    + Bump Standards-Version to 3.8.3 (no changes).
  * debian/rules:
    + Empty dependency_libs in all .la files.

  * debian/patches/10_sanei_usb_update.dpatch:
    + Added; from git, favour the interface detected by sanei_usb_init(). This
      helps with some machines like the Canon MP730.

 -- Julien BLACHE <jblache@debian.org>  Sat, 29 Aug 2009 16:55:34 +0200

sane-backends (1.0.20-5) unstable; urgency=low

  * debian/control:
    + Bump Standards-Version to 3.8.2 (no changes).

  * debian/patches/08_cardscan_usbids.dpatch:
    + Added; fix USB IDs for the CardScan 800c (closes: #528829).
  * debian/patches/09_po_update_es_add_gl.dpatch:
    + Added; update es translation and add new gl translation, courtesy of
      Miguel Bouzada <mbouzada@gmail.com>.
  * debian/patches/20_disable_rpath.dpatch:
    + Added; do not use rpath. For some reason this decided to pop up now,
      even though the previous revision of the package did not suffer from
      this. Go figure.

 -- Julien BLACHE <jblache@debian.org>  Fri, 26 Jun 2009 14:39:41 +0200

sane-backends (1.0.20-4) unstable; urgency=low

  * debian/rules:
    + Serialize autotools/patch/configure for parallel builds, now that
      parallel builds are possible with the upstream build system
      (closes: #506620).
  * debian/control:
    + Bump libsane-extras dependencies to 1.0.20.1.
  * debian/sane-utils.saned.init:
    + Add status action, taken from iaxmodem (closes: #528265).

  * debian/patches/07_tools_missing_libcam.dpatch:
    + Added; fix sane_find_scanner build on kFreeBSD by adding missing SCSI
      libraries. From upstream via Aurélien JARNO (closes: #528594).

 -- Julien BLACHE <jblache@debian.org>  Thu, 14 May 2009 12:06:47 +0200

sane-backends (1.0.20-3) unstable; urgency=low

  * debian/patches/06_cap_always_settable.dpatch:
    + Added; add back SANE_CAP_ALWAYS_SETTABLE which was mistakenly
      removed from SANE 1.0.20 (closes: #527675, #527682).

 -- Julien BLACHE <jblache@debian.org>  Fri, 08 May 2009 21:03:56 +0200

sane-backends (1.0.20-2) unstable; urgency=low

  * Update previous changelog entry wrt #519101 resolution.

  * debian/patches/04_udev_rules_fix.dpatch:
    + Added; fix udev rules, use ATTRS instead of ATTR (closes: #527196).
  * debian/patches/05_saned_avahi_fds_fix.dpatch:
    + Added; fix a possible net backend hang when saned is run in debug
      mode. Could also happen in standalone mode, but a lot less likely.

 -- Julien BLACHE <jblache@debian.org>  Wed, 06 May 2009 12:02:59 +0200

sane-backends (1.0.20-1) unstable; urgency=low

  * New upstream release.
    + Unsupported devices are no longer included in the udev rules
      (closes: #519101).

  * debian/control:
    + Bump Standards-Version to 3.8.1 (no changes).
    + Add build-dep on libv4l-dev.
    + Add dependency on libv4l-dev to libsane-dev.
    + Move libsane-dbg to debug section.
  * debian/rules:
    + Use DESTDIR at install time.
    + Remove rpath from sane-find-scanner.

  * debian/patches/01_missing_pthreads.dpatch:
    + Added; new build system breaks build when using pthreads.
  * debian/patches/02_frontends_libs.dpatch:
    + Added; only link the frontends with the libraries they need.
  * debian/patches/03_libsane_deps.dpatch:
    + Added; reduce libsane.so deps to the bare minimum.

  * debian/patches/11_minimum_linkage.dpatch:
    + Removed; build system was redone using automake and this isn't
      needed anymore.
  * debian/patches/12_new_configure.dpatch:
    + Removed; not needed anymore, due to #11 going away.

  * debian/patches/21_sane-config.in_no_rpath.dpatch:
    + Updated; updated for new build system.
  * debian/patches/23_unneeded_doc.dpatch:
    + Updated; updated for new build system.

  * debian/patches/22_dll_backend_conf.dpatch:
    + Updated; dll.d support has been merged upstream, update dll.conf header.

  * debian/patches/01_manpages_fixes.dpatch, 02_pixma_update.dpatch,
    03_snapscan_usb_ftok_fix.dpatch, 04_sane-desc_hal_new.dpatch,
    05_hp_timing_fix.dpatch, 06_sanei_scsi_attach_fix.dpatch,
    07_epson2_be_nice.dpatch, 08_epson2_be_nice_to_saned.dpatch,
    09_avision_fixes.dpatch, 10_sm3840_unbreak_sane_open.dpatch,
    30_new_saned.dpatch, 31_sanei_pthread_64bit_fix.dpatch,
    32_net_backend_standard_fix.dpatch, 33_scanimage_options_fix.dpatch,
    40_fujitsu_fixes.dpatch, 41_epjitsu_fixes.dpatch:
    + Removed; fixes and enhancements taken from upstream or merged upstream
      in this release.

 -- Julien BLACHE <jblache@debian.org>  Mon, 04 May 2009 12:45:50 +0200

sane-backends (1.0.19-26) unstable; urgency=low

  * debian/rules:
    + Do not generate /etc/modprobe.d/libsane anymore.

  * debian/libsane.preinst:
    + Remove obsolete /etc/modprobe.d/libsane conffile.

  * debian/patches/30_new_saned.dpatch:
    + Updated; workaround for backends writing to stdin/stderr/stdout when
      run via inetd, which breaks the network dialog and causes the remote
      net backend to crash (closes: #516982).

 -- Julien BLACHE <jblache@debian.org>  Wed, 04 Mar 2009 10:49:42 +0100

sane-backends (1.0.19-25) unstable; urgency=low

  * debian/rules:
    + Remove comment bit, breaking configure invocation.
  * debian/control:
    + Add ${misc:Depends}.
  * debian/sane-utils.postrm:
    + Make the script set -e.

  * debian/patches/30_new_saned.dpatch:
    + Updated; (net backend) do not attempt to lock the Avahi polling
      thread before stopping it, it now produces a deadlock. Looks like
      a change/fix was made in Avahi (closes: #513122).

 -- Julien BLACHE <jblache@debian.org>  Wed, 18 Feb 2009 11:50:31 +0100

sane-backends (1.0.19-24) unstable; urgency=low

  * debian/rules:
    + Enable use of pthread instead of fork for reader processes.
  * debian/libsane.postinst:
    + Remove code dealing with devfs/hotplug/hotplug-ng.

  * debian/patches/11_minimum_linkage.dpatch:
    + Update; add $(LIBPTHREAD) to library dependencies where needed.

 -- Julien BLACHE <jblache@debian.org>  Sun, 15 Feb 2009 11:50:13 +0100

sane-backends (1.0.19-23) unstable; urgency=low

  * debian/patches/09_avision_fixes.dpatch:
    + Updated; fix reader task handling to not signal the whole process group
      erroneously.

  * debconf translations:
    + it.po: courtesy of Luca Monducci (closes: #507563).

 -- Julien BLACHE <jblache@debian.org>  Tue, 09 Dec 2008 16:14:06 +0100

sane-backends (1.0.19-22) unstable; urgency=low

  * debian/patches/41_epjitsu_fixes.dpatch:
    + Added; from CVS, fix double-free issues in epjitsu (closes: #506750).

 -- Julien BLACHE <jblache@debian.org>  Mon, 24 Nov 2008 15:02:04 +0100

sane-backends (1.0.19-21) unstable; urgency=low

  * debian/rules:
    + Use an error handler for saned's init.
  * debian/sane-utils.postinst:
    + Added error handler for saned init (closes: #493745).

  * debconf translations:
    + es.po: courtesy of Ignacio Mondino (closes: #499202).

 -- Julien BLACHE <jblache@debian.org>  Fri, 19 Sep 2008 10:50:04 +0200

sane-backends (1.0.19-20) unstable; urgency=low

  * debian/control:
    + Make sane-utils depend on update-inetd (>= 4.31) which won't break
      with debconf.
  * debian/sane-utils.postinst:
    + update-inetd needs debconf sometimes, so keep debconf enabled until
      after the update-inetd call.

 -- Julien BLACHE <jblache@debian.org>  Fri, 05 Sep 2008 11:04:59 +0200

sane-backends (1.0.19-19) unstable; urgency=low

  * debian/rules:
    + Install umax_pp into sane-utils (closes: #496833).

  * debian/patches/40_fujitsu_fixes.dpatch:
    + Added; upstream backport of fujitsu backend fixes, fixes a string
      initialization issue in config file parsing, adds color mode for the
      fi-6130, 6230, 6140, 6240 and fixes fi-6230 hangs at wakeup from
      powersave mode.
      Thanks to M. Allan Noah for providing a backport (closes: #494156).

 -- Julien BLACHE <jblache@debian.org>  Thu, 28 Aug 2008 10:31:35 +0200

sane-backends (1.0.19-18) unstable; urgency=low

  * debian/patches/10_sm3840_unbreak_sane_open.dpatch:
    + Added; from CVS, fix the way sane_open() checks for sanei_usb_open()
      errors (closes: #496249).

  * debconf translations:
    + ja.po: courtesy of Hideki Yamane (closes: #493568).

 -- Julien BLACHE <jblache@debian.org>  Wed, 27 Aug 2008 19:58:15 +0200

sane-backends (1.0.19-17) unstable; urgency=low

  * debian/patches/33_scanimage_options_fix.dpatch:
    + Added; get the option descriptor for option 0 before getting the value
      for option 0. This is a standard-compliance fix needed for proper
      operation with the net backend.
  * debian/patches/30_new_saned.dpatch:
    + Updated; fix initialization of runas_{g,u}id and ngroups, preventing
      failures later on in some cases (saned -a without username).

 -- Julien BLACHE <jblache@debian.org>  Tue, 05 Aug 2008 12:10:44 +0200

sane-backends (1.0.19-16) unstable; urgency=low

  * debian/patches/30_new_saned.dpatch:
    + Updated; Fix seteuid()/setegid() call order and set supplemental group
      list (closes: #493084).

 -- Julien BLACHE <jblache@debian.org>  Thu, 31 Jul 2008 11:46:53 +0200

sane-backends (1.0.19-15) unstable; urgency=low

  * debian/patches/09_avision_fixes.dpatch:
    + Enable this patch for real.
  * debian/patches/31_sanei_pthread_64bit_fix.dpatch:
    + Updated.

 -- Julien BLACHE <jblache@debian.org>  Tue, 22 Jul 2008 23:05:50 +0200

sane-backends (1.0.19-14) unstable; urgency=low

  * debian/patches/32_net_backend_standard_fix.dpatch:
    + Updated; fix sane_control_option() in the net backend so as to bring
      the net backend behaviour back in line with standard backends. This
      should fix some issues reported with the net backend lately.
  * debian/patches/01_manpages_fixes.dpatch:
    + Updated; fix some more hyphen vs. minus sign issues.

  * debian/rules:
    + Include debug symbols for sane-utils into libsane-dbg.
  * debian/copyright:
    + Update.

 -- Julien BLACHE <jblache@debian.org>  Sun, 20 Jul 2008 12:51:25 +0200

sane-backends (1.0.19-13) unstable; urgency=low

  * debian/libsane.README.Debian:
    + Fix udev rules filename (closes: #490656).
  * debian/patches/01_manpages_fixes.dpatch:
    + Updated; fix hyphen vs. minus sign issues reported by lintian.
  * debian/patches/30_new_saned.dpatch:
    + Updated; manpage fixes.

 -- Julien BLACHE <jblache@debian.org>  Mon, 14 Jul 2008 13:17:44 +0200

sane-backends (1.0.19-12) unstable; urgency=low

  * debian/control:
    + Bump Standards-Version to 3.8.0 (no changes).

  * debian/patches/30_new_saned.dpatch:
    + Updated; properly terminate child processes when exiting from the
      debug mode.
  * debian/patches/32_net_backend_standard_fix.dpatch:
    + Added; do not reload the option descriptors cache behind the frontend's
      back in sane_control_option(). Fetch options descriptors in sane_open()
      so GET_VALUE on option 0 can still work without explicitely getting
      option descriptor 0 first.

  * debconf translations:
    + sv.po: courtesy of Martin Bagge (closes: #487369).

 -- Julien BLACHE <jblache@debian.org>  Tue, 24 Jun 2008 22:10:35 +0200

sane-backends (1.0.19-11) unstable; urgency=low

  * debian/patches/30_new_saned.dpatch:
    + Updated; lock the Avahi thread before stopping it and tearing down the
      Avahi objects (closes: #484464).
  * debian/patches/09_avision_fixes.dpatch:
    + Added; from CVS, misc avision backend fixes (closes: #474706, #475198).

  * debconf translations:
    + ru.po: courtesy of Yuri Kozlov (closes: #481656).

 -- Julien BLACHE <jblache@debian.org>  Fri, 06 Jun 2008 17:37:28 +0200

sane-backends (1.0.19-10) unstable; urgency=low

  * debian/sane-utils.postinst:
    + Make proper use of debconf !@#%$ (closes: #481442).

  * debconf translations:
    + fr.po: update by Christian Perrier (closes: #481439).

 -- Julien BLACHE <jblache@debian.org>  Fri, 16 May 2008 19:26:48 +0200

sane-backends (1.0.19-9) unstable; urgency=low

  * debian/sane-utils.postinst:
    + Do not attempt to remove saned from the scanner group if it isn't part
      of the group in the first place (closes: #481288).
  * debian/patches/31_sanei_pthread_64bit_fix.dpatch:
    + Added; from CVS, fix sanei_pthread on 64bit platforms.

 -- Julien BLACHE <jblache@debian.org>  Thu, 15 May 2008 18:54:37 +0200

sane-backends (1.0.19-8) unstable; urgency=low

  * Reupload 1.0.19-7 to unstable.

  * debconf translations:
    + pt.po: courtesy of Américo Monteiro (closes: #480219).
    + cs.po: courtesy of Miroslav Kure (closes: #480313).
    + de.po: courtesy of Helge Kreutzmann (closes: #480366).
    + vi.po: courtesy of Clytie Siddall (closes: #480483).
    + fi.po: courtesy of Esko Arajärvi (closes: #480550).
    + fr.po: update by Christian Perrier.

 -- Julien BLACHE <jblache@debian.org>  Wed, 14 May 2008 19:13:29 +0200

sane-backends (1.0.19-7) experimental; urgency=low

  * Introducing new saned & net backend features.
    + saned can now run as a standalone daemon and offers mDNS/DNS-SD. The net
      backend can discover saned servers on the (local) network.

  * debian/patches/01_manpages_fixes.dpatch:
    + Fix man warnings in sane-config.1 and sane-mustek_pp.5.
  * debian/patches/30_new_saned.dpatch:
    + Added; from CVS HEAD, backport new saned and net backend.
  * debian/sane-utils.README.Debian:
    + Enhancements, typo fixes.
  * debian/sane-utils.templates, debian/sane-utils.config,
    debian/sane-utils.postinst:
    + Add a debconf question to automatically add the saned user to the
      scanner group.
    + Add a debconf question to enable saned as a standalone daemon.
  * debian/rules:
    + Enable Avahi support at configure time.
    + Call dh_installdebconf.
    + Call dh_installinit.
  * debian/control:
    + Build-Depend on po-debconf, libavahi-client-dev (>= 0.6.4).
    + sane-utils: add ${misc:Depends} to get the appropriate debconf
      dependencies.
    + sane-utils: recommend avahi-daemon.
    + libsane: recommend avahi-daemon.
    + libsane-dev: depend on libavahi-client-dev.
  * debian/sane-utils.saned.init, debian/sane-utils.saned.default:
    + Add an initscript & default file for saned.

  * debconf translations:
    + eu.po: courtesy of Piarres Beobide (closes: #479380, #479808).
    + fr.po: courtesy of Christian Perrier.
    + pt_BR.po: courtesy of Eder L. Marques (closes: #479785).
    + gl.po: courtesy of Jacobo Tarrio (closes: #479838).

 -- Julien BLACHE <jblache@debian.org>  Wed, 07 May 2008 18:37:07 +0200

sane-backends (1.0.19-6) unstable; urgency=low

  * debian/patches/08_epson2_be_nice_to_saned.dpatch:
    + Added; from CVS, be nice to saned and do not pollute fd 0
      (closes: #479052).

 -- Julien BLACHE <jblache@debian.org>  Sat, 03 May 2008 16:46:12 +0200

sane-backends (1.0.19-5) unstable; urgency=low

  * debian/patches/07_epson2_be_nice.dpatch:
    + Added; from CVS, be nice to other backends and close the scanner device
      when the device is not recognized (or another error happens)
      (closes: #476468).

 -- Julien BLACHE <jblache@debian.org>  Sat, 19 Apr 2008 17:16:13 +0200

sane-backends (1.0.19-4) unstable; urgency=low

  * debian/patches/03_snapscan_usb_ftok_fix.dpatch:
    + Updated; improve the patch by falling back to ftok() for non-libusb
      devices.
  * debian/patches/04_sane-desc_hal_new.dpatch:
    + Added; add support for newer HAL versions.
  * debian/patches/05_hp_timing_fix.dpatch:
    + Added; fix timing issue with HP scanners (closes: #472819).
  * debian/patches/06_sanei_scsi_attach_fix.dpatch:
    + Added; from CVS, continue to iterate over the list of devices even
      if an attempt to attach one of the devices fails.
  * debian/rules:
    + Generate HAL FDI file for newer HAL versions (closes: #472664).
  * debian/libsane-dev.doc-base:
    + Fix doc-base section.

 -- Julien BLACHE <jblache@debian.org>  Fri, 28 Mar 2008 22:39:17 +0100

sane-backends (1.0.19-3) unstable; urgency=low

  * debian/patches/01_disable_epson2.dpatch:
    + Removed; reenable the epson2 backend.
  * debian/patches/03_snapscan_usb_ftok_fix.dpatch:
    + Added; work around the usage of ftok() in the snapscan backend. See
      the patch description for details (closes: #466855).

 -- Julien BLACHE <jblache@debian.org>  Sat, 15 Mar 2008 16:16:38 +0100

sane-backends (1.0.19-2) unstable; urgency=low

  * debian/patches/02_pixma_update.dpatch:
    + Added; update pixma backend from CVS, adding support for
       - Pixma MP210, MP470, MP520, MP610, MultiPASS MP710
       - MP140, MP220, MultiPASS MP740 (untested)
       - MP970 (experimental, untested)
      (closes: #468270).
  * debian/rules:
    + Generate and install HAL fdi file (closes: #466540).
  * debian/control:
    + Add update-inetd dependency for sane-utils.
  * debian/sane-utils.postinst, debian/sane-utils.postrm:
    + Add support for update-inetd (closes: #426514).
  * debian/sane-utils.README.Debian:
    + Document update-inetd usage.

 -- Julien BLACHE <jblache@debian.org>  Sat, 01 Mar 2008 14:11:29 +0100

sane-backends (1.0.19-1) unstable; urgency=low

  * New upstream release.
    + New backends: cardscan (Corex Cardscan 800c), epjitsu (Epson-based
      Fujitsu), epson2 (various Epson scanners), hp3900 (HP ScanJet 3970 and
      more), hp5590 (HP ScanJet 5590 and more), hpljm1005 (HP LaserJet M1005
      and more), hs2p (Ricoh IS400 series)
    + Fix for the pixma backend (closes: #459663).
    + Regression fix for the avision backend (closes: #458478, #458932).
  * debian/patches/02_hurd_no_plustek_pp.dpatch:
    + Removed; merged upstream.
  * debian/patches/11_minimum_linkage.dpatch:
    + Updated.
  * debian/patches/12_new_configure.dpatch:
    + Updated.
  * debian/control:
    + Adjust libsane-extras dependencies for 1.0.19.

 -- Julien BLACHE <jblache@debian.org>  Tue, 12 Feb 2008 21:44:19 +0100

sane-backends (1.0.19~cvs20071213-5) unstable; urgency=low

  * debian/control:
   + Build-Depends: xutils-dev instead of xutils.
   + Depend on libsane-extras{,-dev,-dbg} to help fix up the buggy udev rules
      in libsane-extras.
    + Promote libgphoto2-2-dev to Depends: for libsane-dev.
  * debian/patches/02_hurd_no_plustek_pp.dpatch:
    + Added; do not build plustek_pp on Hurd (closes: #457378).
  * debian/patches/12_new_configure.dpatch:
    + Updated.

 -- Julien BLACHE <jblache@debian.org>  Mon, 07 Jan 2008 12:07:27 +0100

sane-backends (1.0.19~cvs20071213-4) unstable; urgency=low

  * debian/patches/11_minimum_linkage.dpatch:
    + Updated; add libcam for coolscan & umax, remove it for cardscan.

 -- Julien BLACHE <jblache@debian.org>  Mon, 31 Dec 2007 14:11:34 +0100

sane-backends (1.0.19~cvs20071213-3) unstable; urgency=low

  * debian/control:
    + Tighten relationship with libsane-extras due to the udev rules renaming.

 -- Julien BLACHE <jblache@debian.org>  Fri, 28 Dec 2007 11:45:30 +0100

sane-backends (1.0.19~cvs20071213-2) unstable; urgency=low

  * debian/rules:
    + Generate udev rules as debian/libsane.udev, clean as needed.
    + Use dh_installudev.
    + Remove libsane-dll.* from /usr/lib/sane; libsane.so and libsane-dll.so
      are the same backend.
  * debian/libsane.postinst:
    + Remove udev installation code.
  * debian/libsane.preinst:
    + Added; handle upgrade from previous udev code to dh_installudev.
  * debian/patches/11_minimum_linkage.dpatch:
    + Added; only link backends to the libraries they need.
  * debian/patches/12_new_configure.dpatch:
    + Added; new configure script.
  * debian/patches/12_gphoto2_link_backend_only.dpatch:
    + Removed; obsoleted by 11_minimum_linkage.dpatch.
  * debian/patches/13_new_configure.dpatch:
    + Removed; now 12_new_configure.dpatch.

 -- Julien BLACHE <jblache@debian.org>  Tue, 25 Dec 2007 22:58:26 +0100

sane-backends (1.0.19~cvs20071213-1) unstable; urgency=low

  * New CVS snapshot.
    + New backend: hp3900.
  * debian/control:
    + Bump Standards-Version to 3.7.3 (no changes).
    + Bump libsane-extras{,-dev} dependencies/conflicts/replaces to 1.0.18.13.
    + Remove module-init-tools recommendation, enforced by udev which is a
      dependency.
  * debian/rules:
    + Remove ${module-init-tools} substvar.

 -- Julien BLACHE <jblache@debian.org>  Thu, 13 Dec 2007 21:59:02 +0100

sane-backends (1.0.19~cvs20071028-1) unstable; urgency=low

  * New CVS snapshot.
    + All backends now declare OPT_NUM_OPTS of type SANE_TYPE_INT (closes: #448162).
    + Fixed USB IDs for the Epson CX-6600 (closes: #419349).
    + Added USB IDs for the Epson DX-6000 (closes: #442051).
  * debian/control:
    + libsane-dev Recommends: libgphoto2-2-dev.

 -- Julien BLACHE <jblache@debian.org>  Sun, 28 Oct 2007 11:17:36 +0100

sane-backends (1.0.19~cvs20070730-1) unstable; urgency=low

  * New CVS snapshot.
    + Workaround for CONFIG_USB_SUSPEND (closes: #434276).
  * debian/control, debian/rules:
    + Make libsane depend on makedev | udev on Linux (closes: #428220).
  * debian/libsane.postinst:
    + Change MAKEDEV invocation to invoke /dev/MAKEDEV instead of /sbin/MAKEDEV.
  * debian/control:
    + Do not {build-,}depend on libusb-dev nor libieee1284-dev on hurd-i386
      (closes: #434575).
    + Use ${binary:Version} instead of ${Source-Version}.
  * debian/rules:
    + Do not ignore make distclean errors.
  * debian/patches/30_sanei_scsi_sg_ioctl.dpatch:
    + Removed; merged upstream.

 -- Julien BLACHE <jblache@debian.org>  Mon, 30 Jul 2007 14:03:13 +0200

sane-backends (1.0.19~cvs20070505-3) unstable; urgency=low

  * debian/patches/30_sanei_scsi_sg_ioctl.dpatch:
    + Added; use the SG_IO ioctl interface instead of the asynchronous
      read/write SG3 interface. This allows the use of SCSI scanners in
      mixed 32/64bit environments, thanks to the ioctl 32bit compatibility
      layer taking care of the 32/64bit sg_hdr conversion (closes: #420193).

    If you own a SCSI scanner, please report back on this change; especially
    if, compared to the previous version (1.0.19~cvs20070505-2):
     - the scanner backtracks more than it used to with the previous version
     - you see weird errors OR you see no error and you should be seeing some
     - performance sucks
     - resulting image is broken in one way or another
     - ...

 -- Julien BLACHE <jblache@debian.org>  Sun, 20 May 2007 10:46:00 +0200

sane-backends (1.0.19~cvs20070505-2) unstable; urgency=low

  * debian/patches/01_disable_epson2.dpatch:
    + Added; disable epson2 backend by default (closes: #422697).

 -- Julien BLACHE <jblache@debian.org>  Sat, 12 May 2007 10:37:11 +0200

sane-backends (1.0.19~cvs20070505-1) unstable; urgency=low

  * New CVS snapshot.
    + New backend: hp5590.
  * debian/patches/31_epson_remove_check.dpatch:
    + Removed; merged upstream.

 -- Julien BLACHE <jblache@debian.org>  Sat, 05 May 2007 20:37:07 +0200

sane-backends (1.0.19~cvs20070421-1) unstable; urgency=low

  * debian/control:
    + Update Build-Depends for the TeXLive migration.
    + Removed old Conflicts.
    + Upgrade libsane-extras minimum version to 1.0.18.6.
  * debian/rules:
    + Drop hotplug support.
    + Drop code for Sarge backports.
  * debian/libsane.postinst:
    + Remove old hotplug-ng files, code taken from Ubuntu.
  * debian/libsane.README.Debian, debian/sane-utils.README.Debian:
    + Removed hotplug notes.
  * debian/patches/03_usb_perms_664.dpatch:
    + Removed; merged upstream.
  * debian/patches/11_hotplug_wait_for_device.dpatch:
    + Removed; not needed anymore.
  * debian/patches/30_udev_long_comment_lines.dpatch:
    + Removed; merged upstream.
  * debian/patches/32_microtek2_add_check.dpatch:
    + Removed; merged upstream.
  * debian/patches/33_manpages_fixes.dpatch:
    + Removed; merged upstream.

 -- Julien BLACHE <jblache@debian.org>  Sat, 21 Apr 2007 13:33:26 +0200

sane-backends (1.0.18-6) unstable; urgency=low

  * Enable libieee1284 support on kFreeBSD-amd64 (closes: #413178).
  * debian/control:
    + Build-depend on libieee1284-3-dev (>= 0.2.10-5) for all architectures.
    + libsane-dev depends on libieee1284-3-dev (>= 0.2.10-5) for all architectures.
  * debian/rules:
    + Remove the libieee1284-3-dev substitution variable.

 -- Julien BLACHE <jblache@debian.org>  Sat,  3 Mar 2007 11:39:33 +0100

sane-backends (1.0.18-5) unstable; urgency=medium

  * debian/patches/32_microtek2_add_check.dpatch:
    + Added; Add missing return status check, preventing a segfault later
      on (closes: #398153).
  * debian/patches/33_manpages_fixes.dpatch:
    + Added; fix man warnings in some manpages.

 -- Julien BLACHE <jblache@debian.org>  Mon,  8 Jan 2007 19:52:22 +0100

sane-backends (1.0.18-4) unstable; urgency=medium

  * debian/patches/31_epson_remove_check.dpatch:
    + Added; Remove bogus check in epson backend get_identity2_information()
      affecting Stylus CX5xxx models (closes: #399119, #402444).
  * debian/sane-utils.README.Debian:
    + Fix typo, the manpage for saned is in section 8 not 1.
  * debian/control:
    + libsane-dbg is Priority: extra.
    + Remove Uploaders.

      Thank you Aurélien JARNO for your help during these years.

 -- Julien BLACHE <jblache@debian.org>  Sat,  6 Jan 2007 18:46:43 +0100

sane-backends (1.0.18-3) unstable; urgency=low

  * debian/patches/30_udev_long_comment_lines.dpatch:
    + Added; split very long comment lines in the udev rules file
      (closes: #376859).
  * debian/libsane.README.Debian:
    + Updated; udev no longer sets permissions on /proc/bus/usb/xxx/yyy,
      /dev/bus/usb/xxx/yyy is used instead now.

 -- Julien BLACHE <jblache@debian.org>  Sun, 30 Jul 2006 20:40:09 +0200

sane-backends (1.0.18-2) unstable; urgency=low

  * debian/control:
    + Build-Depends: libltdl3-dev, needed to link with libgphoto2-2.
    + sane-utils Suggests: unpaper.

 -- Julien BLACHE <jblache@debian.org>  Tue,  4 Jul 2006 09:09:04 +0200

sane-backends (1.0.18-1) unstable; urgency=low

  * New upstream release.
    + New backends: dell1600n_net, hp3500, pixma, stv680 (closes: #360303).
    + Canon LiDE 60 USBids added to the genesys description file (closes: #366871).
  * debian/patches/01_usbids.dpatch:
    + Removed; merged upstream.
  * debian/patches/26_manpages_spelling_fixes.dpatch:
    + Removed; merged upstream.
  * debian/patches/25_glibc_sys_io_h.dpatch:
    + Removed; merged upstream.
  * debian/patches/03_usb_perms_664.dpatch:
    + Updated; the convert-usermap.sh scripts are gone.
  * debian/patches/04_udev_rules_fix.dpatch:
    + Removed; merged upstream.
  * debian/rules:
    + Use sane-desc to generate the udev rules file and the hotplug data file.
    + Improve manpage list generation for the libsane package.
  * debian/control:
    + Build-Depends: libtiff4-dev, for the dell1600n_net backend.

 -- Julien BLACHE <jblache@debian.org>  Mon,  3 Jul 2006 20:30:17 +0200

sane-backends (1.0.17-4) unstable; urgency=low

  * debian/compat:
    + Bumped DH_COMPAT to 5.
  * debian/control:
    + Bumped Standards-Version to 3.7.2 (no changes).
    + Build-Depend on debhelper (>= 5.0.0) for DH_COMPAT=5.
    + New libsane-dbg binary for debugging symbols (closes: #366767).
  * debian/rules:
    + Tell dh_strip to put debugging symbols into libsane-dbg.

 -- Julien BLACHE <jblache@debian.org>  Fri, 26 May 2006 13:40:01 +0200

sane-backends (1.0.17-3) unstable; urgency=low

  * debian/control:
    + Add ${libieee1284-3-dev} to libsane-dev Depends: (closes: #364294).

 -- Julien BLACHE <jblache@debian.org>  Sat, 22 Apr 2006 19:58:12 +0200

sane-backends (1.0.17-2) unstable; urgency=low

  [ Aurélien JARNO ]
  * debian/control:
    + Build-depends: libcam-dev on kfreebsd-i386 and kfreebsd-amd64.
    + Build-depends: !libieee1284-dev on kfreebsd-amd64.
    + libsane-dev depends: libcam-dev on GNU/kFreeBSD.
  * debian/patches/25_glibc_sys_io_h.dpatch:
    + New; check for GNU libc instead of Linux kernel.

  [ Julien BLACHE ]
  * debian/patches/02_udev_rules.dpatch:
    + Removed; coldplugging now works OK, the hotplug script aren't needed
      anymore (closes: #359800).
  * debian/patches/03_usb_perms_664.dpatch:
    + Updated.
  * debian/patches/04_udev_rules_fix.dpatch:
    + Added; fix udev rules file so that the rules only run for ACTION=add
      on the usb subsystem (closes: #359797).
  * debian/patches/01_usbids.dpatch:
    + Added; add Epson Stylus CX7800 USB IDs (closes: #350436).
  * debian/patches/26_manpages_spelling_fixes.dpatch:
    + Added; various spelling fixes to the manpages (closes: #357568).
  * debian/control:
    + Removed Conflicts: on very old SANE versions.
    + Recommends: module-init-tools (>= 3.2.2-1) (closes: #344541).
    + Recommends: udev (>= 0.88-1) for a version of udev with working
      coldplugging support. Let me know if the version can be lowered,
      thanks.
  * debian/rules:
    + Add variable substitution for module-init-tools on Linux.
    + Add version to the udev variable substitution.

 -- Julien BLACHE <jblache@debian.org>  Thu, 13 Apr 2006 21:40:58 +0200

sane-backends (1.0.17-1) unstable; urgency=low

  Julien BLACHE:
  * New upstream release.
    + New backends: hp4200, lexmark, mustek_usb2.
    + Now ignores EBUSY on set_configuration for real (closes: #332281).
    + Fixed USB IDs for BearPaw 2448 TA Plus to use only lowercase letters (closes: #341046).
  * debian/patches/01_hotplug_usbids.dpatch:
    + Removed; merged upstream.
  * debian/patches/02_tools_udev.dpatch:
    + Removed; merged upstream.
  * debian/patches/02_udev_rules.dpatch:
    + Added; add a RUN rule to run the hotplug.d script (for coldplugging).
  * debian/control:
    + Build-Depends: xutils as makedepend is now used by the build system.
    + Adjust conflicts/suggests for libsane-extras.

  Aurélien JARNO:
  * debian/patches/03_usb_perms_664.dpatch:
    + Added; lsusb needs read access to USB devices to work properly.

 -- Julien BLACHE <jblache@debian.org>  Sun, 18 Dec 2005 17:09:47 +0100

sane-backends (1.0.16-5) unstable; urgency=low

  * debian/patches/02_tools_udev.dpatch:
    + Run the hotplug.d script to ensure a working coldplug (closes: #334068).
  * debian/patches/30_misc_fixes.dpatch:
    + Fix a typo in sane-find-scanner(1) (closes: #310333).
  * debian/patches/34_sanei_usb_ignore_set_config_ebusy.dpatch:
    + Ignore EBUSY on set_configuration to better accomodate MFC devices (closes: #332281).
  * debian/libsane.postrm:
    + Remove /etc/udev/rules.d/025_libsane.rules on purge (closes: #333569).

 -- Julien BLACHE <jblache@debian.org>  Thu, 27 Oct 2005 20:25:16 +0200

sane-backends (1.0.16-4) unstable; urgency=low

  * debian/patches/02_tools_udev.dpatch:
    + Fix broken tools/udev/convert-usermap.sh script.

 -- Julien BLACHE <jblache@debian.org>  Wed, 28 Sep 2005 22:59:41 +0200

sane-backends (1.0.16-3) unstable; urgency=low

  * The udev release. Thanks to Marco d'Itri for his help.
  * debian/patches/02_tools_udev.dpatch:
    + Added; adds tools/udev from CVS.
  * debian/rules:
    + Generate the udev rules file for libsane and install it.
    + Generate a modprobe blacklist (same as the hotplug blacklist).
  * debian/libsane.postinst:
    + Symlink the udev rules file under /etc/udev/rules.d; do that only once.
  * debian/control:
    + Recommends: hotplug | udev

 -- Julien BLACHE <jblache@debian.org>  Wed, 28 Sep 2005 22:42:38 +0200

sane-backends (1.0.16-2) unstable; urgency=low

  * debian/patches/11_hotplug_wait_for_device.dpatch:
    + Bump timeout to 25 seconds.
  * debian/patches/01_hotplug_usbids.dpatch:
    + Added; pulled from CVS (closes: #323607).
  * debian/patches/32_plustek_update.dpatch:
    + Supersedes 32_add_lide25.dpatch; plustek backend update, adds LiDE 25
      support and fixes LiDE 20 support.
  * debian/patches/33_sm3600_update.dpatch:
    + Added; pulled from CVS, sm3600 adapted to sanei_usb.

 -- Julien BLACHE <jblache@debian.org>  Sun, 28 Aug 2005 18:33:18 +0200

sane-backends (1.0.16-1) unstable; urgency=low

  Julien BLACHE:
  * New upstream release.
    + New backends: sm3840, genesys.
    + Fixed typos in manpages (closes: #310332, #310333).
  * Patches removed (integrated upstream):
    + 01_hotplug_usbids.dpatch
    + 02_tools_hotplug-ng.dpatch
    + 03_manpages_fixes.dpatch
    + Most of 30_misc_fixes.dpatch
    + 31_gt68xx_fixes.dpatch
    + 32_snapscan_update.dpatch
    + 33_avision_update.dpatch
    + 34_plustek_update.dpatch
    + 35_libusbscanner_2.6_fixes.dpatch
    + 36_sane-find-scanner_message.dpatch
    + 37_epson_usbids.dpatch
  * debian/libsane.postinst:
    + Removed the udev check, it's broken and MAKEDEV now does the Right
      Thing (tm) on its own (closes: #310216).
    + Remove anything debconf-related.
  * debian/control:
    + Bumped Standards-Version to 3.6.2 (no changes).
    + Update the conflict on libsane-extras.
    + Downgrade Depends: sane-utils to Recommends: sane-utils now that Sarge
      has been released.
    + Drop dependency on debconf.
  * debian/rules:
    + Generate sane-backends.pot, patch from Martin Pitt (closes: #313527).
    + Comment call to dh_installdebconf, we don't use debconf anymore.

  Aurélien JARNO:
  * DEB_HOST_GNU_SYSTEM replaced by DEB_HOST_ARCH_OS.
  * Get rid of debian/control.in by using the -V option of dpkg-gencontrol.

 -- Julien BLACHE <jblache@debian.org>  Sun,  7 Aug 2005 15:00:05 +0200

sane-backends (1.0.15-10) unstable; urgency=low

  * debian/patches/01_hotplug_usbids.dpatch:
    + Updated; added Genius ColorPage Vivid3XE (closes: #305993).
    + Added Microtek ScanMaker 3700 (closes: #307952).
    + Added Epson Stylus RX620 (closes: #308867).
  * debian/patches/11_hotplug_wait_for_device.dpatch:
    + Added; try to wait for the device to appear in the FS (closes: #302891).
  * debian/patches/30_misc_fixes.dpatch:
    + Updated; fixed "device model referenced not duplicated" in the v4l
      backend (closes: #306458).
  * debian/control.in:
    + Build-Depend on a fixed libusb.

 -- Julien BLACHE <jblache@debian.org>  Sun, 22 May 2005 11:09:19 +0200

sane-backends (1.0.15-9) unstable; urgency=low

  * debian/patches/22_dll_backend_conf.dpatch:
    + Process /etc/sane.d/dll.d first, so that those backends will be loaded
      last. This will prevent buggy extras backends to perturb other backends.
  * debian/patches/03_manpages_fixes.dpatch:
    + Fix a typo in sane(7), reported by A Costa (closes: #302675).
    + Fix 3 typos in scanimage(1), also reported by A Costa (closes: #302334).

 -- Julien BLACHE <jblache@debian.org>  Wed, 20 Apr 2005 16:17:20 +0200

sane-backends (1.0.15-8) unstable; urgency=low

  Aurélien Jarno:
  * Drop support for the scanner kernel module. Switch to libusb NOW.
    + Drop the devfs config file, remove /etc/devfs/conf.d/devfs
      in libsane.postinst.
  * Transition to the new hotplug hook scheme (pulled from CVS), which is
    compatible with both hotplug and hotplug-ng.
    + Remove /etc/hotplug/usb/libsane.usermap and /etc/hotplug/usb/libusbscanner
      in libsane.postinst.
    + Conflicts with libsane-extras (<< 1.0.15.7) to avoid partial upgrades, as
      1.0.15.7 is the version compatible with the new hotplug script.

  Julien Blache:
  * Added support for GNU/kFreeBSD (closes: #297979).
    + debian/rules: generate control at clean time.
    + debian/rules: install README.{linux,freebsd} depending on the system.
    + debian/patches/23_unneeded_doc.dpatch: do not install OS-specific READMEs.
    + debian/control.in: do not depend on makedev on !linux (via debian/rules).
    + debian/libsane.postinst: do not create device nodes on !linux.
  * debian/rules:
    + Install only the manpages for the backends which have been built.
    + Cut the head of libsane.usermap to remove the comments pertaining to the
      old usermap format.
  * debian/libsane.README.Debian:
    + Updated to relfect the hotplug changes.
  * debian/libsane.postinst:
    + Do not create device nodes when udev is in use.

 -- Julien BLACHE <jblache@debian.org>  Sun,  6 Mar 2005 00:36:43 +0100

sane-backends (1.0.15-7) unstable; urgency=low

  Julien BLACHE:
  * debian/patches/22_dll.conf_debian.dpatch
    + Removed; renamed to 22_dll_backend_conf.dpatch.
  * debian/patches/22_dll_backend_conf.dpatch
    + Added; adds a Debian-specific comment to the dll.conf file, and patches
      the dll backend to look for pieces of dll.conf in the /etc/sane.d/dll.d
      directory; this is a facility for packages providing external backends,
      like libsane-extras, hpoj and hplip.

  Aurélien Jarno:
  * debian/patches/01_hotplug_usbids.dpatch
    + Added Epson Corp. Stylus CX6600 to libsane.usermap (closes: #293082).

 -- Julien BLACHE <jblache@debian.org>  Mon, 21 Feb 2005 16:43:41 +0100

sane-backends (1.0.15-6) unstable; urgency=low

  * debian/control
    + Recommends: hotplug (was Suggests: hotplug).
    + Suggests: hpoj, hplip.
  * debian/rules
    + Blacklist the scanner module wrt hotplug.
  * debian/libsane.README.Debian
    + Explain that the scanner module is going away, and that we're now
      blacklisting it wrt hotplug upon installation of the package.

  * debian/patches/01_hotplug_usbids.dpatch
    + Updated; added Epson Stylus RX-425.
  * debian/patches/37_epson_usbids.dpatch
    + Added; adds Epson Stylus RX-425.
  * debian/patches/30_misc_fixes.dpatch
    + Updated; added initialization of dev->scanning in coolscan.c.
  * debian/patches/02_manpages_fixes.dpatch
    + Added; manpages fixes from esr.
  * debian/patches/32_snapscan_deinterlacer.dpatch
    + Removed; renamed to 32_snapscan_update.dpatch.
  * debian/patches/32_snapscan_update.dpatch
    + Added; contains all of the previous 32_snapscan_deinterlacer.dpatch,
      plus it adds support for the Epson Perfection 1270, BenQ 5250C and
      quality calibration for the Epson Perfection 2480.
  * debian/patches/22_dll.conf_debian.dpatch
    + Updated; added the sm3840 backend provided by libsane-extras and the
      hpaio backend provided by hplip (closes: #291435).
  * debian/patches/38_artec_e+48_conf.dpatch
    + Added; adds proper configuration for the Umax AstraSlim SE.

 -- Julien BLACHE <jblache@debian.org>  Sat, 22 Jan 2005 13:54:58 +0100

sane-backends (1.0.15-5) unstable; urgency=medium

  * debian/patches/34_plustek_update.dpatch:
    + Added; pulled from CVS, contains fixes for Epson Perfection 1260
      scanners (closes: #290029).
  * debian/patches/35_libusbscanner_2.6_fixes.dpatch:
    + Added; applied patch from Martin Pitt to use sysfs to determine the
      device number, instead of guessing it in a semi-broken way
      (closes: #289666).
  * debian/patches/36_sane-find-scanner_message.dpatch
    + Added; adds a "make sure your scanner is powered up and plugged in"
      message to sane-find-scanner (closes: #287592).

 -- Julien BLACHE <jblache@debian.org>  Wed, 12 Jan 2005 17:48:30 +0100

sane-backends (1.0.15-4) unstable; urgency=medium

  * debian/control:
    + Added build-dependency on pkg-config (closes: #286140).
  * debian/patches/13_new_configure.dpatch:
    + Fixed; remove unwanted autom4te.cache directory from the patch
      (closes: #286143).

 -- Julien BLACHE <jblache@debian.org>  Sun, 19 Dec 2004 18:08:23 +0100

sane-backends (1.0.15-3) unstable; urgency=low

  * debian/patches/31_gt68xx_fixes.dpatch:
    + Updated; added a fix for Mustek BearPaw 2448 TA/CS Plus scanners
      (closes: #284674).
  * debian/patches/33_avision_update.dpatch:
    + Added; improved avision backend from CVS.

 -- Julien BLACHE <jblache@debian.org>  Thu,  9 Dec 2004 16:01:50 +0100

sane-backends (1.0.15-2) unstable; urgency=low

  * debian/patches/01_hotplug_usbids.dpatch:
    + Added; taken from CVS, adds missing USB IDs to the hotplug scripts
      (closes: #280821, #281003).
  * debian/patches/31_gt68xx_fixes.dpatch:
    + Added; taken from CVS, fixes incorrect mode check for some scanners
      (closes: #281061).
  * debian/patches/30_misc_fixes.dpatch:
    + Added; miscellaneous fixes from CVS/sane-devel.
  * debian/patches/32_snapscan_deinterlacer.dpatch:
    + Added; taken from CVS, adds a deinterlacer filter to the snapscan
      backend, which is needed to scan at 2400 DPI with some scanners.

 -- Julien BLACHE <jblache@debian.org>  Sun, 14 Nov 2004 15:39:36 +0100

sane-backends (1.0.15-1) unstable; urgency=low

  * New upstream release.
    + Patch for Microtek Phantom C6 on PowerPC merged upstream
      (closes: #274523).
    + New backend: niash.
  * debian/control:
    + Update conflicts/replaces on libsane-extras 1.0.15.1.
  * debian/patches/01_libusbscanner.dpatch:
    + Removed; taken from CVS, included in this version.
  * debian/patches/02_epson_usbids.dpatch:
    + Removed; taken from CVS, included in this version.
  * debian/patches/03_hotplug_usbids.dpatch:
    + Removed; merged upstream.
  * debian/patches/11_libtool_unneeded_checks.dpatch:
    + Removed.
  * debian/patches/12_gphoto2_link_backend_only.dpatch:
    + Updated; revert unwanted backend/Makefile.in patch causing an incorrect
      rpath in /usr/lib/libsane.la (closes: #279082).
  * debian/patches/13_new_configure.dpatch:
    + Updated.
  * debian/patches/22_dll.conf_debian.dpatch:
    + Updated; the niash backend is now part of SANE.
  * debian/patches/25_saned_man_section.dpatch:
    + Removed; merged upstream.
  * debian/patches/26_scanimage_batch.dpatch:
    + Removed; merged upstream.
  * debian/patches/27_snapscan-usb_count_urb.dpatch:
    + Removed; taken from CVS, included in this version.
  * debian/sane-utils.README.Debian:
    + Fix reference to /usr/share/doc/libsane/README.Debian.gz
      (closes: #278670).

 -- Julien BLACHE <jblache@debian.org>  Tue,  9 Nov 2004 23:28:23 +0100

sane-backends (1.0.14-7) unstable; urgency=medium

  * Co-maintainer upload.
  * debian/patches/27_snapscan-usb_count_urb.dpatch:
    + Added, backported from CVS: Don't enforce even number of URB packages
    on snapscan 1212u_2 (closes: #250885).
  * debian/patches/03_hotplug_usbids.dpatch:
    + Added Epson Corp. Stylus CX6400 to libsane.usermap (closes: #293946).

 -- Aurelien Jarno <aurel32@debian.org>  Mon,  9 Aug 2004 11:17:13 +0200

sane-backends (1.0.14-6) unstable; urgency=medium

  * Urgency=medium as this revision will fix the upgrade path from Woody.
  * debian/control:
    + Removed obsolete gcc-3.3 build-depends (closes: #262245).
    + Upgraded the sane-utils recommendation to a dependency as an upgrade
      path from Woody (closes: #263408).
  * debian/rules:
    + Create /etc/hotplug/blacklist.d/libsane to prevent hotplug
      from loading the no-longer-needed hpusbscsi module (closes: #260734).
  * debian/patches/03_hotplug_usbids.dpatch:
    + Added; adds HP ScanJet 5300C to libsane.usermap (closes: #260736).
  * debian/patches/26_scanimage_batch.dpatch:
    + Added; adds possibility to interrupt a batch scan in scanimage by
      pressing ^D (closes: #260230).

 -- Julien BLACHE <jblache@debian.org>  Wed,  4 Aug 2004 22:12:40 +0200

sane-backends (1.0.14-5) unstable; urgency=low

  * debian/patches/02_epson_usbids.dpatch
    + Put back the USB IDs for the Perfection 1650, remove the USB IDs for the
    Perfection 1250, which now really fixes the bug.

 -- Julien BLACHE <jblache@debian.org>  Sun, 13 Jun 2004 13:48:27 +0200

sane-backends (1.0.14-4) unstable; urgency=low

  * debian/libsane.postinst
    + modutils is Required, not Essential; replace kernelversion (provided by
      modutils) by uname -r | cut (closes: #254140).

 -- Julien BLACHE <jblache@debian.org>  Sun, 13 Jun 2004 12:12:02 +0200

sane-backends (1.0.14-3) unstable; urgency=low

  * debian/libsane.postinst
    + Do not create /dev/usb/scanner* if running a 2.6 kernel.
  * debian/patches/02_espon_usbids.dpatch
    + Remove USB IDs for Perfection 1250 and 1260; these scanners are handled
      by the plustek backend (pulled from CVS) (closes: #248859).
  * debian/patches/25_saned_man_section.dpatch
    + Added; saned goes to /usr/sbin, its manpage should go to section 8.

 -- Julien BLACHE <jblache@debian.org>  Fri, 11 Jun 2004 21:37:18 +0200

sane-backends (1.0.14-2) unstable; urgency=low

  * debian/patches/22_dll.conf_debian.dpatch
    + Enable the hpoj backend by default (closes: #246985, #248379).
  * debian/patches/01_libusbscanner.dpatch
    + Pulled from CVS, fixes hotplug's lack of backward compatibility
    (closes: #248770).

 -- Julien BLACHE <jblache@debian.org>  Thu, 20 May 2004 20:25:18 +0200

sane-backends (1.0.14-1) unstable; urgency=low

  * New upstream release.
    + USB IDs for EPSON Stylus CX5400 added (closes: #243295).
    + USB IDs for Nikon CoolScan 5000 added (closes: #243792).
  * debian/hotplug/*
    + removed, integrated upstream (tools/hotplug).
  * debian/patches/01_mustek_pp_unified.dpatch
    + removed, integrated in this release.
  * debian/patches/02_hp_backend_usb_fix.dpatch
    + removed, integrated in this release.
  * debian/rules
    + install the provided hotplug script and config file.

 -- Julien BLACHE <jblache@debian.org>  Sat,  1 May 2004 16:26:47 +0200

sane-backends (1.0.13-4) unstable; urgency=low

  * debian/patches/02_hp_backend_usb_fix.dpatch
    + added, pulled from CVS, fixes USB problems on kernel 2.6 (closes: #242188).
  * Updated libsane.usermap from CVS (closes: #242090).
  * Updated README.Debian, fixed a couple of typos.

 -- Julien BLACHE <jblache@debian.org>  Sun, 11 Apr 2004 10:31:41 +0200

sane-backends (1.0.13-3) unstable; urgency=low

  * debian/libsane.config, debian/libsane.templates, debian/po:
    + Removed, we don't use debconf anymore.
  * debian/postinst:
    + Fixed the /dev/usb/parport0 typo that should have read /dev/parport0.
      Thanks to Tore Anderson for catching this one.
    + Removed anything debconf-related, only purge whatever is left in the
      debconf DB (closes: #224597).

 -- Julien BLACHE <jblache@debian.org>  Sat, 20 Dec 2003 18:44:37 +0100

sane-backends (1.0.13-2) unstable; urgency=low

  * debian/patches: order of the patches changed (slightly).
    + 01_mustek_pp_unified.dpatch: scan area fixes.

 -- Julien BLACHE <jblache@debian.org>  Mon,  1 Dec 2003 19:19:19 +0100

sane-backends (1.0.13-1) unstable; urgency=low

  * New upstream release.
  * debian/patches:
    + 20_net.c_fixes.dpatch : removed, merged upstream.
    + 21_gt68xx_uhci_fixes.dpatch : ditto.
    + 04_hp5400_sanei_config2.dpatch : ditto.
    + 03_new_configure : updated.
    + 04_mustek_pp_unified: added; with this patch the mustek_pp backend
      supports both CIS and CCD scanners (closes: #190998).
  * debconf:
    + Direct users to README.Debian.gz instead of README.Debian
      (closes: #217347).
    + Added Japanese translation (closes: #214040).
    + Added Dutch translation (closes: #218905).
    + Added German translation, thanks to Dirk Ritter and debian-l10n-german.
  * debian/sane-utils.README.Debian:
    + More details about the saned user and group, and the reason why the saned
      user is not part of the scanner group by default (closes: #220024).
  * debian/devfs/scanner:
    + Added an example for SCSI devices, thanks to Dirk Ritter.
  * debian/control:
    + Standards-Version bumped to 3.6.1 (no changes).
  * debian/rules, debian/compat:
    + Switch to DH_COMPAT 4, and moved from dh_movefiles to dh_install.
  * debian/control, debian/rules:
    + Build-depend on chrpath and use it to remove rpath from the binaries.

 -- Julien BLACHE <jblache@debian.org>  Mon, 24 Nov 2003 18:35:21 +0100

sane-backends (1.0.12-7) unstable; urgency=low

  * The "Maintainer's birthday" release.
  * Simplified the needlessly complex debconf questions. Now use a multiselect
    question instead of 3 independent questions.
    + debian/libsane.templates: rewritten to use a multiselect type
    + debian/libsane.config: ditto, try to convert from the older questions,
      then purge them once done.
    + debian/libsane.postinst: rewritten to parse the answer from the new
      debconf thingy.
    + debian/control: now Depends: debconf (>= 0.5.0) due to the use of db_fset
      in debian/libsane.config.
  * debian/libsane.postinst: use ':' as a separator for chown instead of '.'.
  * debian/libsane.README.Debian: ditto.
  * debian/control: only Suggests: hotplug (closes: #205291).

 -- Julien BLACHE <jblache@debian.org>  Wed, 20 Aug 2003 14:03:14 +0200

sane-backends (1.0.12-6) unstable; urgency=low

  * Julien BLACHE <jblache@debian.org>
    * debian/control
      + Bumped Standards-Version to 3.6.0 (no changes).
      + libsane depends on adduser (>= 3.47).
      + libsane recommends hotplug.
    * debian/libsane.templates: templates slightly rewritten to accomodate the
      various debconf frontends (closes: #202744).
    * debconf-related items:
      + Switched debconf templates to debconf-po, thus build-depends on
        debhelper (>= 4.1.16) (closes: #203669).
      + Added french debconf translation based on translation from Michel
        Grentzinger <mic.grentz(AT)online.fr> for sane-backends 1.0.12-5
        (closes: #203670).
    * debian/libsane.postinst:
      + Add a scanner system group, and chown root.scanner /dev/usb/scanner* if
        we create them (closes: #201851).
    * debian/libsane.README.Debian:
      + Added a Setup paragraph, detailing permissions issues and solutions
        implemented by this package.
    * debian/sane-utils.README.Debian:
      + Added, deals with permissions issues wrt the saned daemon.
    * hotplug support:
      + debian/hotplug/libusbscanner: added, hotplug script for scanners used
        with libusb, courtesy of Max Kutny <mkut(AT)umc.com.ua>. Installed as
        /etc/hotplug/usb/libusbscanner.
      + debian/hotplug/libsane.usermap: example map file for use with hotplug.
        Installed as /etc/hotplug/usb/libsane.usermap.
  * Aurélien JARNO <aurel32@debian.org>
    * debian/devfs/scanner:
      + Added, installed as /etc/devfs/conf.d/scanner.

 -- Julien BLACHE <jblache@debian.org>  Wed,  6 Aug 2003 13:08:11 +0200

sane-backends (1.0.12-5) unstable; urgency=low

  * 21_gt68xx_uhci_fixes.dpatch : fix timeout with UHCI host controllers.
  * debian/control:
    + Added temporary Build-Dependency on gcc-3.3 (>= 3.3.1-0pre0), which should
      fix the ICE on m68k.
  * debian/rules:
    + Should build with -O2 on m68k again.

 -- Julien BLACHE <jblache@debian.org>  Wed,  2 Jul 2003 12:04:59 +0200

sane-backends (1.0.12-4) unstable; urgency=low

  * Julien BLACHE <jblache@debian.org>
    * The "I fucking hate libtool" release. Prevent libtool from checking things
      we do not need at all, such as a C++ or an F77 compiler. Sigh.
    * Converted to dpatch. Build-depends on dpatch.
    * Re-enable the gphoto2 backend, -but- do so that frontends do not get linked
      against libgphoto2. Only the backend is linked against it. (closes: #195613)
    * Thus, adds back the libgphoto2-2-dev build-dependency.
    * Effectively move the html doc to the html subdir, instead of copying them
      with dh_install.
  * Aurélien JARNO <aurel32@debian.org>
    * Add autotools-stamp, so that configure won't be run twice.
    * Do not link sanei_config2 in hp5400 : not needed (fixes an undefined
      symbol, too).

 -- Julien BLACHE <jblache@debian.org>  Tue,  3 Jun 2003 22:34:48 +0200

sane-backends (1.0.12-3) unstable; urgency=low

  * Fix the net backend so that it _does_ try all alternatives before giving
    up connecting to the server (closes: #195396).

 -- Julien BLACHE <jblache@debian.org>  Fri, 30 May 2003 19:22:54 +0200

sane-backends (1.0.12-2) unstable; urgency=low

  * Build with -O1 on m68k; -O2 triggers an ICE.

 -- Julien BLACHE <jblache@debian.org>  Thu, 29 May 2003 11:36:41 +0200

sane-backends (1.0.12-1) unstable; urgency=low

  * New upstream release.
    * Should now work on m68k. Yeah. (closes: #77356).
    * sane(7) has been improved (closes: #188647).
    * scanimage(1) has been fixed, wrt --batch.
    * The hp5400 backend has been included, replaces libsane-extras (<< 1.0.12.1).
    * IPv6 support.
  * Standards-Version bumped to 3.5.10 (no changes).
  * libsane-dev belongs to libdevel.
  * Do not generate manpages and documentation we do not need.

 -- Julien BLACHE <jblache@debian.org>  Sun, 25 May 2003 21:14:37 +0200

sane-backends (1.0.11-4) unstable; urgency=medium

  * Move saned.conf to the sane-utils package. Woops. (closes: #192742)

 -- Julien BLACHE <jblache@debian.org>  Sat, 10 May 2003 08:41:23 +0200

sane-backends (1.0.11-3) unstable; urgency=medium

  * The "We want to enter testing" release.
  * Do not build the gphoto2 backend. Gphoto2 is blocked by a bunch of other
    packages (KDE, ...) and we're free of RC bugs. Enough.
  * Moved libphoto2-2-dev to Build-Conflicts.
  * Bumped shlibs.

 -- Julien BLACHE <jblache@debian.org>  Sat,  3 May 2003 21:09:58 +0200

sane-backends (1.0.11-2) unstable; urgency=low

  * Ok, ok, do not tell how to configure libusb (closes: #180570).
  * Do not print "Adding saned..." in sane-utils postinst when the user already
    exists.
  * Pulled fixed gphoto2 backend from CVS (closes: #180514).

 -- Julien BLACHE <jblache@debian.org>  Thu, 13 Feb 2003 13:22:21 +0100

sane-backends (1.0.11-1) unstable; urgency=low

  * New upstream release.
    * Security fixes to saned (closes: #180203).
  * Added some debconf dialogs :
    * /dev/parport*
    * /dev/sg*
    * note about /proc/bus/usb

 -- Julien BLACHE <jblache@debian.org>  Sun,  9 Feb 2003 21:17:16 +0100

sane-backends (1.0.10-2) unstable; urgency=low

  * Fix postrm breakage (closes: #179586).

 -- Julien BLACHE <jblache@debian.org>  Mon,  3 Feb 2003 12:39:14 +0100

sane-backends (1.0.10-1) unstable; urgency=low

  * New upstream release.
    * Fixed sane-scsi manpage (closes: #174136).
    * mustek_pp now has CIS support (closes: #152321).
  * Added http://www.mostang.com/sane/sane-mfgs.html
    as /usr/share/doc/libsane/supported.html (closes: #174131).
  * New backends, previously included in libsane-extras :
    * gt68xx
    * artec_eplus48u (known as tevion9693usb)
  * datadir is ${prefix}/share, not ${prefix}/share/sane.
  * Remove /usr/lib/sane/libsane.so.1, as it's not libsane.so.1 (looks like
    a libtool side-effect).
  * Remove a couple more unwanted READMEs.
  * Bumped Standards-Version to 3.5.8.
  * Added a debconf dialog to create /dev/usb/* (closes: #177979).
  * Added missing dependency on adduser to sane-utils.

 -- Julien BLACHE <jblache@debian.org>  Sun,  2 Feb 2003 11:22:24 +0100

sane-backends (1.0.9-4) unstable; urgency=low

  * Pulled dll.c from CVS, fixes in-line comments (closes: #171521).
  * Applied patch for Plustek backend rounding bug (closes: #172012).

 -- Julien BLACHE <jblache@debian.org>  Mon,  9 Dec 2002 11:51:26 +0100

sane-backends (1.0.9-3) unstable; urgency=low

  * Rebuilt against new libgphoto2 package.
  * Changed Uploaders: filed so that Aurélien's uploads won't be tagged as
    NMU again.
  * Do not generate debian/libsane.conffiles at build time, this is handled
    by dh_installdeb automatically ; otherwise we end up with each conffile
    being listed twice...

 -- Julien BLACHE <jblache@debian.org>  Sun,  1 Dec 2002 11:29:43 +0100

sane-backends (1.0.9-2) unstable; urgency=low

  * Co-maintainer upload.
  * Remove /etc/sane.d directory on purge (closes: bug#167603).

 -- Aurelien Jarno <aurel32@debian.org>  Mon,  4 Nov 2002 14:10:54 +0100

sane-backends (1.0.9-1) unstable; urgency=low

  * New upstream release.
    * Video for Linux (v4l) backend cleanup (closes: #159634).
    * Updated Avision backend (closes: #146054).
    * Updated Epson backend (closes: #114017).
    * Fixed char signedness in backend/plustek-usbshading.c (closes: #164464).
  * Fixed debian/copyright (closes: #146057).
  * Enabled translations.
  * Do not install the upstream changelog twice.
  * sane-utils does not create /home/saned.
  * Fixed packages descriptions (wrt #165138).

 -- Julien BLACHE <jblache@debian.org>  Thu, 24 Oct 2002 18:52:29 +0200

sane-backends (1.0.8-4) unstable; urgency=low

  * libsane-extras has its own source package now.

 -- Julien BLACHE <jblache@debian.org>  Sun, 13 Oct 2002 10:49:54 +0200

sane-backends (1.0.8-3) unstable; urgency=low

  * New maintainers.
  * New upstream release (closes: #162532, #149317).
    * saned manpage mentions /usr/sbin/saned (closes: #141464).
    * Symlinks for manpages are properly created (closes: #99551).
    * Fixed hostnames handling in saned.conf (closes: #51171).
    * HP backend update (closes: #116962).
    * Backend loader respects LD_LIBRARY_PATH (closes: #143771).
    * Path for Epson USB scanner corrected in conf file (closes: #154296, #154305).
    * A test backend is included, safer than the pnm backend (closes: #139256).
    * Umax backend fixed (closes: #158676).
    * HP backend fixed, no longer segfaults (closes: 154827).
  * Repackaged from scratch, using debhelper.
  * Standards-Version bumped to 3.5.6.
  * Do not include rpath informations in sane-config (closes: #143603).
  * Fixed build problem wrt umask (closes: #95440).
  * Updated libsane-dev Depends (closes: #142679).
  * Fixed typos in umax_pp.conf (closes: #158742).
  * Fixed hp.conf for some scanners (closes: #154828).
  * Fixed README.Debian (closes: #146039).
  * Fixed sane-plustek(5) manpage (closes: #159435).
  * New package sane-utils, contains sane-find-scanner, scanimage and saned.
    * sane-utils creates user and group saned (closes: #141465).
  * New package libsane-extras, containing some extra backends
    * hp4200     (v0.2p1)
    * gt68xx     (v1.0-23)
    * niash      (v20020217) (closes: #160327)
    * tevion9693 (v0.0.9)
  * Disabled translations until 1.0.9.

 -- Julien BLACHE <jblache@debian.org>  Sat, 12 Oct 2002 10:28:09 +0200

sane-backends (1.0.8-2) unstable; urgency=low

  * Added build-depends on gettext(closes: #163681).

 -- Kevin Dalley <kevind@rahul.net>  Mon,  7 Oct 2002 09:32:21 -0700

sane-backends (1.0.8-1) unstable; urgency=low

  * New upstream release.  Many n ew backends.  Many more updated backends.

 -- Kevin Dalley <kevind@rahul.net>  Sun,  6 Oct 2002 18:09:28 -0700

sane-backends (1.0.7-3.2) unstable; urgency=high

  * Non-Maintainer Upload.
  * Fix build on SPARC.
  * Fix build on HPPA, although it's not RC (closes: Bug#138108).

 -- Julien BLACHE <jblache@debian.org>  Sun,  7 Apr 2002 11:39:41 +0200

sane-backends (1.0.7-3.1) unstable; urgency=medium

  * Non-Maintainer Upload.
  * Fixes compilation on Alpha, using the frontend/scanimage.c file from
    the current CVS (close: Bug#138108).
  * Applied patch submitted to #139509, regarding config.{sub,guess} issues
    on MIPS (close: Bug#139509).
  * Fixed lintian complaint wrt misplaced Conflicts: field in control file.
  * Fixed lintian complaint about .comment section in /usr/lib/sane/*.so.*.

 -- Julien BLACHE <jblache@debian.org>  Sun, 31 Mar 2002 20:24:48 +0200

sane-backends (1.0.7-3) unstable; urgency=low

  * link with libusb-0.1-4 (closes: #119393).

 -- Kevin Dalley <kevind@rahul.net>  Fri, 15 Mar 2002 18:31:08 +0000

sane-backends (1.0.7-2) unstable; urgency=low

  * stop link with libusb due to inconsistencies with versions of libusb
    libraries.  When libusb installation is cleaned up, then usb support
    will be added again.  Unfortunately, this re-opens bug #119393, though
    with a lower severity. (closes: #138349).

 -- Kevin Dalley <kevind@rahul.net>  Thu, 14 Mar 2002 22:25:53 +0000

sane-backends (1.0.7-1) unstable; urgency=low

  * new upstream release of sane.

  * adds libusb, which includes ScanMaker 3600 drivers (closes: #119393).
  * installs plustek-share.h so that plustek driver can be built (closes:
    #72341)

 -- Kevin Dalley <kevind@rahul.net>  Thu, 14 Mar 2002 01:02:21 +0000

sane-backends (1.0.6-1) unstable; urgency=low

  * new upstream release of sane.
  * new backends: gphoto2.

 -- Kevin Dalley <kevind@rahul.net>  Sun, 27 Jan 2002 23:30:19 -0800

sane-backends (1.0.5-3) unstable; urgency=low

  * rebuilt with new version of libgimp-1.2.2-2.

 -- Kevin Dalley <kevind@rahul.net>  Tue,  2 Oct 2001 22:31:15 -0700

sane-backends (1.0.5-2) unstable; urgency=low

  * removed incorrect build dependency on libc6-dev (closes: #108639).

 -- Kevin Dalley <kevind@rahul.net>  Thu, 16 Aug 2001 08:12:40 -0700

sane-backends (1.0.5-1) unstable; urgency=low

  * New backends: bh (Bell+Howell Copiscan II series), dc240 (Kodak DC240
    Digital Camera), sm3600 (Microtek ScanMaker 3600), umax_pp (Umax paralell
    port scanners).

  * Fixed security bug in saned.c that allowed access to scanner without
    password.

 -- Kevin Dalley <kevind@rahul.net>  Sat, 28 Jul 2001 12:38:46 -0700

sane-backends (1.0.4-2) unstable; urgency=low

  * increased timeout in sanei_scsi.c, which removes problem with 2.4
    kernel (closes: #84407).

 -- Kevin Dalley <kevind@rahul.net>  Thu, 31 May 2001 04:36:29 -0700

sane-backends (1.0.4-1) unstable; urgency=low

  * new upstream release of sane.
  * as63driver added (closes: #69625).

 -- Kevin Dalley <kevin@seti.org>  Sun, 28 Jan 2001 09:17:24 -0800

sane-gimp1.1 (1.0.3-4) unstable; urgency=low

  * link sane-gimp1.1 with libgimp1.1-1.1.29.
  * change control files so that packages sane and sane-gimp1.1 are
    explicitly described as working with gimp and gimp1.1 respectively.
    The package sane now mentions the packages sane-gimp1.1 and vice
    versa.

 -- Kevin Dalley <kevind@rahul.net>  Sun,  5 Nov 2000 13:56:49 -0800

sane (1.0.3-3) unstable; urgency=low

  * link sane-gimp1.1 with libgimp1.1-1.1.28, which is new library (closes:
    #75029).

  * define GIMP_ENABLE_COMPAT_CRUFT to allow use of newer libgimp.

 -- Kevin Dalley <kevind@rahul.net>  Sun, 22 Oct 2000 21:52:29 -0700

sane (1.0.3-2) unstable; urgency=low

  * fix dependency in libsane-dev (closes: #71578).
  * remove extraneous file which contains space in its name, which causes
    patch and dpkg-source to fail. (closes: #71566, #71564, #71540).

 -- Kevin Dalley <kevind@rahul.net>  Fri, 22 Sep 2000 23:04:17 -0700

sane (1.0.3-1) unstable; urgency=low

  * new upstream release of sane
  * new backends: mustek_pp, plustek, st400, v41
  * Many updated backends
  * 16 bit support for scanimage.

 -- Kevin Dalley <kevind@rahul.net>  Sat,  2 Sep 2000 11:32:08 -0700

sane (1.0.2-1) unstable; urgency=low

  * new upstream release of sane
  * Aliased and hidden backend support.
  * Added Ricoh IS50 support.
  * updated many backends.
  * New Linux SCSI Generic driver.
  * sane-gimp1.1 linked with libsane-1,1.22 (closes: #66544).

 -- Kevin Dalley <kevind@rahul.net>  Mon,  3 Jul 2000 23:38:42 -0700

sane (1.0.1-1999-10-21-12) frozen unstable; urgency=low

  * add libjpeg62-dev, tetex-bin, tetex-extra to Build-Depends (closes:
    #61834, 61835).

 -- Kevin Dalley <kevind@rahul.net>  Wed,  5 Apr 2000 10:37:38 -0700

sane-gimp1.1 (1.0.1-1999-10-21-11) frozen unstable; urgency=low

  * Add Build-Depends to control files for sane and sane-gimp1.1 (closes:
    #60923).

 -- Kevin Dalley <kevind@rahul.net>  Mon, 27 Mar 2000 03:16:55 -0800

sane (1.0.1-1999-10-21-10) frozen unstable; urgency=low

  * Improve description in control file (closes: #57032).
  * link sane-gimp1.1 with libgimp1.1.17, which is the most recent
    libgimp1.1 in frozen.

 -- Kevin Dalley <kevind@rahul.net>  Mon, 28 Feb 2000 02:37:20 +0000

sane (1.0.1-1999-10-21-9) frozen unstable; urgency=low

  * link sane-gimp1.1 with libgimp1.1.15, which is the most recent
    libgimp1.1 in frozen.

 -- Kevin Dalley <kevind@rahul.net>  Sat, 22 Jan 2000 01:57:55 -0800

sane (1.0.1-1999-10-21-8) unstable; urgency=low

  * sane now conflicts with gimp1.1, which increases the chances of
    getting the correct versions of gimp with each version of sane
    (closes: #55070).  Unfortunately, sane-gimp1.1 cannot conflict with
    gimp, since gimp1.1 provides gimp.

 -- Kevin Dalley <kevind@rahul.net>  Sun, 16 Jan 2000 11:41:52 -0800

sane (1.0.1-1999-10-21-7) unstable; urgency=low

  * link with libgimp1.1.14 (closes: #53982)
  * remove conflict of libsane-gimp1.1 with itself (closes: #49709).
  * Each version of sane and sane-gimp1.1 now depend upon the same release
    of libsane (closes: #50927).
  * shlibs dependencies is updated to ">= 1.0.1-1999-10-21-7" to reduce
    chances of problem #50927.

 -- Kevin Dalley <kevind@rahul.net>  Sun,  9 Jan 2000 13:22:57 -0800

sane (1.0.1-1999-10-21-6) unstable; urgency=low

  * add conflict between libsane and older version of sane, sane-gimp1.1
    due to moving documentation from sane to libsane (closes: #50735).

 -- Kevin Dalley <kevind@rahul.net>  Sat, 20 Nov 1999 15:15:30 -0400

sane (1.0.1-1999-10-21-5) unstable; urgency=low

  * added link for /usr/lib/libsane-dll.so, again.

 -- Kevin Dalley <kevind@rahul.net>  Fri, 19 Nov 1999 00:03:40 -0400

sane (1.0.1-1999-10-21-4) unstable; urgency=low

  * corrected problematic stripping of "libsane.la" (closes: #50099).
  * move much of documentation from sane package to libsane and
    libsane-dev package.
  * move find-scanner to libsane

 -- Kevin Dalley <kevind@rahul.net>  Wed, 17 Nov 1999 23:08:44 -0400

sane (1.0.1-1999-10-21-3) unstable; urgency=low

  * added link for /usr/lib/libsane-dll.so

 -- Kevin Dalley <kevind@rahul.net>  Mon, 25 Oct 1999 01:24:30 -0700

sane (1.0.1-1999-10-21-2) unstable; urgency=low

  * corrected link of libsane.so.1

 -- Kevin Dalley <kevind@rahul.net>  Sun, 24 Oct 1999 14:43:14 -0700

sane (1.0.1-1999-10-21-1) unstable; urgency=low

  * cvs server version from 1999-10-21
  * many bugs fixed in various backends

 -- Kevin Dalley <kevind@rahul.net>  Fri, 22 Oct 1999 22:06:52 -0700

sane (1.0.1-6) unstable; urgency=low

  * relink sane-gimp1.1 with libgimp1.1.10

 -- Kevin Dalley <kevind@rahul.net>  Thu, 14 Oct 1999 23:33:18 -0700

sane (1.0.1-5) unstable; urgency=low

  * relink sane-gimp1.1 with libgimp1.1.9
  * separate sane-gimp1.1 from sane

 -- Kevin Dalley <kevind@rahul.net>  Sun, 10 Oct 1999 03:42:37 -0700

sane (1.0.1-4) unstable; urgency=low

  * added sane-gimp1.1 (used with gimp1.1) at the same time as sane for
    gimp-1.0.x.

 -- Kevin Dalley <kevind@rahul.net>  Wed, 30 Jun 1999 00:54:57 -0700

sane (1.0.1-3) unstable; urgency=low

  * try to fix problems with shared libraries.  Install libsane-dll.so in
    /usr/lib so that programs linked with libsane will run.  (Needed to
    fix xsane bug #37756).

 -- Kevin Dalley <kevind@rahul.net>  Mon, 31 May 1999 22:15:16 -0700

sane (1.0.1-2) unstable; urgency=low

  * remove dependencies for libsane

 -- Kevin Dalley <kevind@rahul.net>  Fri, 30 Apr 1999 23:08:50 -0700

sane (1.0.1-1) unstable; urgency=low

  * version 1.0.1
  * new backend for Sharp scanner
  * update backends for Kodak DC25, HP, Microtek, Micro, Mustek, Nikon
    Coolscan, snapscan, UMAX.
  * fixes problem with HP scanner (closes #32516)
  * includes backend for dc210 (closes #31377)

 -- Kevin Dalley <kevind@rahul.net>  Tue, 27 Apr 1999 01:24:33 -0700

sane (1.00-2) unstable; urgency=low

  * removed examples directory.  Moved examples/tools to tools directory.

 -- Kevin Dalley <kevind@rahul.net>  Mon,  5 Apr 1999 02:04:53 -0700

sane (1.00-1) unstable; urgency=low

  * 1.00 is released
  * artec is back in dll.conf
  * many more scanner supported and more changes

 -- Kevin Dalley <kevind@rahul.net>  Sat,  5 Dec 1998 01:00:30 -0800

sane (0.74-2) unstable; urgency=low

  * temporarily comment out artec in dll.conf, due to bad interaction with
    Umax scanner.  If artec is used as a scanner, uncomment artec from
    dll.conf
  * automatically generates conffiles, thanks for
    Roman.Hodek@informatik.uni-erlangen.de (fixes bug #26545)
  * fixes problem with creation of /usr/share/sane during build process
    (bug #26314)

 -- Kevin Dalley <kevind@rahul.net>  Sun, 20 Sep 1998 18:00:28 -0700

sane (0.74-1) unstable; urgency=low

  * first release of 0.74

 -- Kevin Dalley <kevind@rahul.net>  Sat, 22 Aug 1998 23:06:26 -0700

sane (0.72-1) frozen unstable; urgency=low

  * first official release which supports libgtk1-0.99.9

 -- Kevin Dalley <kevind@rahul.net>  Fri, 10 Apr 1998 02:29:52 -0700

sane (0.71-2) frozen unstable; urgency=low

  * fixed spelling in control files (fixes bug# 19003)
  * modified to match latest change in libgtk-0.99.5
  * change datadir to /usr/share/sane
  * compatible with libgtk1-0.99.8 (fixes bug #19595)

 -- Kevin Dalley <kevind@rahul.net>  Sun, 22 Mar 1998 19:44:10 -0800

sane (0.71-1) unstable; urgency=low

  * new release, which adds support for the following scanners:
        Polaroid Digital Microscope Camera (DMC) backend
        Apple scanner backend
        Nikon CoolScan backend
  * removed execute permission in doc directory (fixes: bug #17949)
  * modified manual page referring to symbolic link of xscanimage (fixes:
    bug #18071)

 -- Kevin Dalley <kevind@rahul.net>  Fri, 27 Feb 1998 23:03:08 -0800

sane (0.70-1) unstable; urgency=low

  * update to version 0.70 of sane, adds AGFA SnapScan backend, updates
    UMAX backend

  * add patches 2-5 to SnapScan backend which allows other scanners
    to work

 -- Kevin Dalley <kevind@rahul.net>  Sat, 31 Jan 1998 17:32:53 -0800

sane (0.69-2) unstable; urgency=low

  * correct umax-scanner.h so that Astra 1200S is legal

 -- Kevin Dalley <kevind@rahul.net>  Sun, 25 Jan 1998 09:44:45 -0800

sane (0.69-1) unstable; urgency=low

  * update to version 0.69 of sane

 -- Kevin Dalley <kevind@rahul.net>  Fri, 23 Jan 1998 20:24:01 -0800

sane (0.68-4) unstable; urgency=low

  * modified gtkglue.c to correspond with changes to libgtk1

 -- Kevin Dalley <kevind@rahul.net>  Tue,  6 Jan 1998 22:24:14 -0800

sane (0.68-3) unstable; urgency=low

  * change plug-in directory to 0.99 to match gimp changes, add explicit
    gimp dependency.
  * added README.debian
  * install find-scanner
  * install many documentation files

 -- Kevin Dalley <kevind@rahul.net>  Fri,  2 Jan 1998 21:51:52 -0800

sane (0.68-2) unstable; urgency=low

  * corrected control file

 -- Kevin Dalley <kevind@rahul.net>  Sun, 21 Dec 1997 18:26:23 -0800

sane (0.68-1) unstable; urgency=low

  * update to version 0.68 of sane

 -- Kevin Dalley <kevind@rahul.net>  Fri,  5 Dec 1997 00:42:27 -0800

sane (0.67-1) unstable; urgency=low

  * first Debian release of sane

 -- Kevin Dalley <kevind@rahul.net>  Tue, 18 Nov 1997 21:38:41 -0800
